On 13/08/2019 18:20, Stefan Wahren wrote:
> Add the BCM2711 to ARCH_BCM2835, but use new machine board code
> because of the differences.
>
> Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
> ---
> arch/arm/mach-bcm/Kconfig | 3 ++-
> arch/arm/mach-bcm/Makefile | 3 ++-
> arch/arm/mach-bcm/bcm2711.c | 22 ++++++++++++++++++++++
> 3 files changed, 26 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/mach-bcm/bcm2711.c
>
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index 5e5f1fa..39bcbea 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -161,6 +161,7 @@ config ARCH_BCM2835
> select GPIOLIB
> select ARM_AMBA
> select ARM_ERRATA_411920 if ARCH_MULTI_V6
> + select ARM_GIC if ARCH_MULTI_V7
> select ARM_TIMER_SP804
> select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
> select TIMER_OF
> @@ -169,7 +170,7 @@ config ARCH_BCM2835
> select PINCTRL_BCM2835
> select MFD_CORE
> help
> - This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
> + This enables support for the Broadcom BCM2711 and BCM283x SoCs.
> This SoC is used in the Raspberry Pi and Roku 2 devices.
>
> config ARCH_BCM_53573
> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> index b59c813..7baa8c9 100644
> --- a/arch/arm/mach-bcm/Makefile
> +++ b/arch/arm/mach-bcm/Makefile
> @@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
> obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
>
> # BCM2835
> -obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
> ifeq ($(CONFIG_ARCH_BCM2835),y)
> +obj-y += board_bcm2835.o
> +obj-y += bcm2711.o
> ifeq ($(CONFIG_ARM),y)
> obj-$(CONFIG_SMP) += platsmp.o
> endif
> diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c
> new file mode 100644
> index 0000000..1fa15b4
> --- /dev/null
> +++ b/arch/arm/mach-bcm/bcm2711.c
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Stefan Wahren
> + */
> +
> +#include <linux/of_address.h>
> +
> +#include <asm/mach/arch.h>
> +
> +#include "platsmp.h"
> +
> +static const char * const bcm2711_compat[] = {
> +#ifdef CONFIG_ARCH_MULTI_V7
> + "brcm,bcm2711",
> +#endif
> +};
> +
> +DT_MACHINE_START(BCM2711, "BCM2711")
> + .dma_zone_size = SZ_1G,
Needs a dependency of ifdef CONFIG_ZONE_DMA.
Regards,
Matthias
> + .dt_compat = bcm2711_compat,
> + .smp = smp_ops(bcm2836_smp_ops),
> +MACHINE_END
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
