[PATCH V2 11/13] ARM: bcm: Add support for BCM2711 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the BCM2711 to ARCH_BCM2835, but use new machine board code
because of the differences.

Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
---
 arch/arm/mach-bcm/Kconfig   |  3 ++-
 arch/arm/mach-bcm/Makefile  |  3 ++-
 arch/arm/mach-bcm/bcm2711.c | 22 ++++++++++++++++++++++
 3 files changed, 26 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-bcm/bcm2711.c

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 5e5f1fa..39bcbea 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -161,6 +161,7 @@ config ARCH_BCM2835
 	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
+	select ARM_GIC if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select TIMER_OF
@@ -169,7 +170,7 @@ config ARCH_BCM2835
 	select PINCTRL_BCM2835
 	select MFD_CORE
 	help
-	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+	  This enables support for the Broadcom BCM2711 and BCM283x SoCs.
 	  This SoC is used in the Raspberry Pi and Roku 2 devices.

 config ARCH_BCM_53573
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index b59c813..7baa8c9 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -42,8 +42,9 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o

 # BCM2835
-obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 ifeq ($(CONFIG_ARCH_BCM2835),y)
+obj-y				+= board_bcm2835.o
+obj-y				+= bcm2711.o
 ifeq ($(CONFIG_ARM),y)
 obj-$(CONFIG_SMP)		+= platsmp.o
 endif
diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c
new file mode 100644
index 0000000..1fa15b4
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm2711.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Stefan Wahren
+ */
+
+#include <linux/of_address.h>
+
+#include <asm/mach/arch.h>
+
+#include "platsmp.h"
+
+static const char * const bcm2711_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V7
+	"brcm,bcm2711",
+#endif
+};
+
+DT_MACHINE_START(BCM2711, "BCM2711")
+	.dma_zone_size	= SZ_1G,
+	.dt_compat = bcm2711_compat,
+	.smp = smp_ops(bcm2836_smp_ops),
+MACHINE_END
--
2.7.4




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux