[PATCH 7/7] ARM: dts: r7s9210-rza2mevb: Add SDHI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The RZ/A2M EVB supports 2 SD card slots. A micro SD slot on the CPU
board, and a full SD card slot on the sub board.

Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
 arch/arm/boot/dts/r7s9210-rza2mevb.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
index df69746244fe..1eba37db7cdc 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -90,6 +90,16 @@
 			 <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */
 			 <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
 	};
+
+	sdhi0_pins: sdhi0 {
+		pinmux = <RZA2_PINMUX(PORT5, 0, 3)>,	/* SD0_CD */
+			 <RZA2_PINMUX(PORT5, 1, 3)>;	/* SD0_WP */
+	};
+
+	sdhi1_pins: sdhi1 {
+		pinmux = <RZA2_PINMUX(PORT5, 4, 3)>,	/* SD1_CD */
+			 <RZA2_PINMUX(PORT5, 5, 3)>;	/* SD1_WP */
+	};
 };
 
 /* High resolution System tick timers */
@@ -130,3 +140,17 @@
 		reg = <0>;
 	};
 };
+
+&sdhi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
-- 
2.16.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux