Hey there! I have just run decode-dimms on this brand new ram kit. After following instructions here: https://www.richud.com/wiki/Ubuntu_See_Live_RAM_Timings_Decode_DIMMS And whilst the command executes, and prints some basic information about my memory. It unfortunately cannot see anything more than what gets printed below. So I was just hoping that this might simply be because the program does not know how to handle / decode this ram. And if I can be any help, for improving support. Then please let me know [id:~] $ sudo modprobe i2c-i801 [id:~] $ sudo i2cdetect -l i2c-1 i2c NVIDIA i2c adapter 5 at 1:00.0 I2C adapter i2c-2 smbus SMBus I801 adapter at f000 SMBus adapter i2c-0 i2c NVIDIA i2c adapter 4 at 1:00.0 I2C adapter [id:~] $ sudo i2cdetect 2 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-2. I will probe address range 0x03-0x77. Continue? [Y/n] y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- 08 -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: 30 -- -- -- 34 35 -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- -- 50: UU -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- [id:~] $ sudo decode-dimms # decode-dimms version $Revision$ Memory Serial Presence Detect Decoder By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner, Jean Delvare, Trent Piepho and others Decoding EEPROM: /sys/bus/i2c/drivers/eeprom/2-0050 Guessing DIMM is in bank 1 ---=== SPD EEPROM Information ===--- EEPROM Checksum of bytes 0-62 OK (0x00) SPD Revision Invalid Fundamental Memory type Unknown (0x00) ---=== Manufacturing Information ===--- Manufacturer GTE Custom Manufacturer Data 9B 00 19 10 E1 C4 CF ("???????") Manufacturing Location Code 0x8D Part Number BLS16G4D30AESB.M16 Revision Code 0x4645 Manufacturing Date 2000-W80 Assembly Serial Number 0x2C003432 Decoding EEPROM: /sys/bus/i2c/drivers/eeprom/2-0052 Guessing DIMM is in bank 3 ---=== SPD EEPROM Information ===--- EEPROM Checksum of bytes 0-62 OK (0x00) SPD Revision Invalid Fundamental Memory type Unknown (0x00) ---=== Manufacturing Information ===--- Manufacturer GTE Custom Manufacturer Data 9B 00 19 10 E1 C5 0F ("???????") Manufacturing Location Code 0x14 Part Number BLS16G4D30AESB.M16 Revision Code 0x4645 Manufacturing Date 2000-W80 Assembly Serial Number 0x2C003432 Number of SDRAM DIMMs detected and decoded: 2 [id:~] $
