From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
Update iProc I2C binding document to add new compatible string
"brcm,iproc-nic-i2c". Optional property "brcm,ape-hsls-addr-mask" is
also added that allows configuration of the host view into the APE's
address for "brcm,iproc-nic-i2c"
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
Signed-off-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
index 7a32bf81bfa9..d12cc33cca6c 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
@@ -3,7 +3,7 @@ Broadcom iProc I2C controller
Required properties:
- compatible:
- Must be "brcm,iproc-i2c"
+ Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
- reg:
Define the base and range of the I/O address space that contain the iProc
@@ -26,6 +26,10 @@ Optional properties:
case, this property should be left unspecified, and driver will fall back
to polling mode
+- brcm,ape-hsls-addr-mask:
+ Required for "brcm,iproc-nic-i2c". Host view of address mask into the
+ 'APE' co-processor. Value must be unsigned, 32-bit
+
Example:
i2c0: i2c@18008000 {
compatible = "brcm,iproc-i2c";
--
2.17.1
