[PATCH v2] i2c: at91: Convert to use struct i2c_timings

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

Instead of using custom variables and parser, convert the driver to use
the ones provided by I2C core.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
- rebased on top of linux-next
 drivers/i2c/busses/i2c-at91.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 3f3e8b3bf5ff..c83caa383cd2 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -34,7 +34,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/pinctrl/consumer.h>
 
-#define DEFAULT_TWI_CLK_HZ		100000		/* max 400 Kbits/s */
 #define AT91_I2C_TIMEOUT	msecs_to_jiffies(100)	/* transfer timeout */
 #define AT91_I2C_DMA_THRESHOLD	8			/* enable DMA if transfer size is bigger than this threshold */
 #define AUTOSUSPEND_TIMEOUT		2000
@@ -190,16 +189,18 @@ static void at91_init_twi_bus(struct at91_twi_dev *dev)
  * Calculate symmetric clock as stated in datasheet:
  * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
  */
-static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
+static void at91_calc_twi_clock(struct at91_twi_dev *dev)
 {
 	int ckdiv, cdiv, div, hold = 0;
 	struct at91_twi_pdata *pdata = dev->pdata;
 	int offset = pdata->clk_offset;
 	int max_ckdiv = pdata->clk_max_div;
-	u32 twd_hold_time_ns = 0;
+	struct i2c_timings timings, *t = &timings;
+
+	i2c_parse_fw_timings(dev->dev, t, true);
 
 	div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk),
-				       2 * twi_clk) - offset);
+				       2 * t->bus_freq_hz) - offset);
 	ckdiv = fls(div >> 8);
 	cdiv = div >> ckdiv;
 
@@ -211,15 +212,12 @@ static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
 	}
 
 	if (pdata->has_hold_field) {
-		of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns",
-				     &twd_hold_time_ns);
-
 		/*
 		 * hold time = HOLD + 3 x T_peripheral_clock
 		 * Use clk rate in kHz to prevent overflows when computing
 		 * hold.
 		 */
-		hold = DIV_ROUND_UP(twd_hold_time_ns
+		hold = DIV_ROUND_UP(t->sda_hold_ns
 				    * (clk_get_rate(dev->clk) / 1000), 1000000);
 		hold -= 3;
 		if (hold < 0)
@@ -236,7 +234,7 @@ static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
 			    | AT91_TWI_CWGR_HOLD(hold);
 
 	dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n",
-		cdiv, ckdiv, hold, twd_hold_time_ns);
+		cdiv, ckdiv, hold, t->sda_hold_ns);
 }
 
 static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
@@ -1052,7 +1050,6 @@ static int at91_twi_probe(struct platform_device *pdev)
 	struct resource *mem;
 	int rc;
 	u32 phy_addr;
-	u32 bus_clk_rate;
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
@@ -1108,12 +1105,7 @@ static int at91_twi_probe(struct platform_device *pdev)
 		dev_info(dev->dev, "Using FIFO (%u data)\n", dev->fifo_size);
 	}
 
-	rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
-			&bus_clk_rate);
-	if (rc)
-		bus_clk_rate = DEFAULT_TWI_CLK_HZ;
-
-	at91_calc_twi_clock(dev, bus_clk_rate);
+	at91_calc_twi_clock(dev);
 	at91_init_twi_bus(dev);
 
 	snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
-- 
2.20.1