Re: [PATCH v3 3/3] i2c: designware: select gpio/default pin when prepare/unprepare recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/17/2018 06:34 AM, Jisheng Zhang wrote:
+ DT maintainers

On Mon, 17 Sep 2018 11:29:49 +0800
Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx> wrote:

On some platforms, the sda/scl pins are muxed with gpio functions, so
they could be used for recovery. Select the gpio/default pin function
when prepare/unprepare recovery.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
---
  drivers/i2c/busses/i2c-designware-core.h   |  3 +++
  drivers/i2c/busses/i2c-designware-master.c | 22 ++++++++++++++++++++++
  2 files changed, 25 insertions(+)

Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux