Re: [PATCH v3 0/3] i2c: designware: select gpio/default pin when prepare/unprepare recovery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+ DT maintainers

On Mon, 17 Sep 2018 11:26:33 +0800
Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx> wrote:

> On some platforms, the sda/scl pins are muxed with gpio functions, so
> they could be used for recovery. Select the gpio/default pin function
> when prepare/unprepare recovery.
> 
> patch1 adds the missing scl-gpios, sda-gpios properties binding doc.
> patch2 adds the pintrl property for i2c bus recovery.
> patch3 selects gpio/default pin when prepare/unprepare recovery.
> 
> Since v2:
>  - add missing property dt-binding
> 
> Since v1:
>  - use IS_ERR_OR_NULL
> 
> Jisheng Zhang (3):
>   dt-bindings: i2c: designware: add optional gpio recovery properties
>   dt-bindings: i2c: designware: add optional pinctrl for bus recovery
>   i2c: designware: select gpio/default pin when prepare/unprepare
>     recovery
> 
>  .../bindings/i2c/i2c-designware.txt           | 12 ++++++++++
>  drivers/i2c/busses/i2c-designware-core.h      |  3 +++
>  drivers/i2c/busses/i2c-designware-master.c    | 22 +++++++++++++++++++
>  3 files changed, 37 insertions(+)
> 




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux