On 9/11/2018 1:41 PM, Guenter Roeck wrote:
On Tue, Sep 11, 2018 at 01:30:41PM -0700, Jae Hyun Yoo wrote:
On 9/11/2018 11:37 AM, Guenter Roeck wrote:
Hi,
On Thu, Aug 23, 2018 at 03:57:31PM -0700, Jae Hyun Yoo wrote:
In most of cases, interrupt bits are set one by one but there are
also a lot of other cases that Aspeed I2C IP sends multiple
interrupt bits with combining master and slave events using a
single interrupt call. It happens much more in multi-master
environment than single-master. For an example, when master is
waiting for a NORMAL_STOP interrupt in its MASTER_STOP state,
SLAVE_MATCH and RX_DONE interrupts could come along with the
NORMAL_STOP in case of an another master immediately sends data
just after acquiring the bus. In this case, the NORMAL_STOP
interrupt should be handled by master_irq and the SLAVE_MATCH and
RX_DONE interrupts should be handled by slave_irq. This commit
modifies irq hadling logic to handle the master/slave combined
events properly.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
Reviewed-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
This patch causes a boot stall when booting witherspoon-bmc with
qemu v3.0, and all i2c device probes fail with error -110 (timeout).
Bisect log is attached for reference.
With the same kernel configuration (aspeed_g5_defconfig),
ast2500-evb and romulus-bmc are still able to boot.
palmetto-bmc with aspeed_g4_defconfig also appears to work.
Is this a problem with qemu ? Should I drop the qemu test
for witherspoon-bmc starting with the next kernel release ?
Thanks,
Guenter
Hi Guenter,
Thanks for your report.
I checked this patch again but it doesn't have any change that could
affect to the probing flow. I'll debug the issue on qemu 3.0 environment
and will share if I find something.
The problem may be that qemu and the new code disagree how interrupts
should be generated and handled, and the new code does not handle the
interrupts it receives from the simulated hardware. This will result
in i2c device probe failure, which in turn can cause all kinds of
problems.
Yes, that makes sense. Looks like it should be reverted until the issue
is fixed. Will submit a patch to revert it.
Thanks,
Jae
