Le 07/08/2017 à 09:16, Julia Lawall a écrit :
On Mon, 7 Aug 2017, Uwe Kleine-König wrote:
On Mon, Aug 07, 2017 at 01:49:53AM +0200, Christophe JAILLET wrote:
'devm_pinctrl_get()' never returns NULL, so this test can be simplified.
That's wrong. If CONFIG_PINCTRL is disabled devm_pinctrl_get returns
NULL. But I think this shouldn't be considered an error, so your change
is right, just the commit log is not.
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 54a47b40546f..7e84662fe1c0 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -997,7 +997,7 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
- if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
+ if (IS_ERR(i2c_imx->pinctrl)) {
dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
return PTR_ERR(i2c_imx->pinctrl);
}
Side note: I'm not sure, this construct is valid. IIRC PTR_ERR should
only be called for values x where IS_ERR(x) is true. Here it is at least
surprising that an message hints to a problem but the return code is 0.
@Julia: I'm sure coccinelle can find more of those?!
I only found a few. Christophe, if you want to fix tem up, please go
ahead.
Hi Julia,
I've looked quickly at your output, and can't see what could/should be
done in the spotted cases.
e100.c: a comment says that 'If it's NULL, then no ucode is
required', so, the behavior looks ok to me
chcr_algo.c: function 'create_wr_fn' is passed as a parameter. I've
no way to make sure of its behavior, so the code could be valid. I won't
touch it.
acl.c: by code inspection, the way the code is written looks valid
to me. We have NULL if the a call in 'ocfs2_get_acl_nolock' returns
-ENODATA. Not that strange to return success in this case
So, personally, I won't propose anything on these files. Up to anyone to
dig further than me.
CJ
julia
diff -u -p /var/linuxes/linux-next/drivers/net/ethernet/intel/e100.c
/tmp/nothing/drivers/net/ethernet/intel/e100.c
--- /var/linuxes/linux-next/drivers/net/ethernet/intel/e100.c
+++ /tmp/nothing/drivers/net/ethernet/intel/e100.c
@@ -1370,8 +1370,6 @@ static inline int e100_load_ucode_wait(s
fw = e100_request_firmware(nic);
/* If it's NULL, then no ucode is required */
- if (!fw || IS_ERR(fw))
- return PTR_ERR(fw);
if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
netif_err(nic, probe, nic->netdev,
diff -u -p /var/linuxes/linux-next/drivers/i2c/busses/i2c-imx.c
/tmp/nothing/drivers/i2c/busses/i2c-imx.c
--- /var/linuxes/linux-next/drivers/i2c/busses/i2c-imx.c
+++ /tmp/nothing/drivers/i2c/busses/i2c-imx.c
@@ -997,9 +997,7 @@ static int i2c_imx_init_recovery_info(st
struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
- if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
dev_info(&pdev->dev, "can't get pinctrl, bus recovery not
supported\n");
- return PTR_ERR(i2c_imx->pinctrl);
}
i2c_imx->pinctrl_pins_default =
pinctrl_lookup_state(i2c_imx->pinctrl,
diff -u -p /var/linuxes/linux-next/drivers/crypto/chelsio/chcr_algo.c
/tmp/nothing/drivers/crypto/chelsio/chcr_algo.c
--- /var/linuxes/linux-next/drivers/crypto/chelsio/chcr_algo.c
+++ /tmp/nothing/drivers/crypto/chelsio/chcr_algo.c
@@ -3159,8 +3159,6 @@ static int chcr_aead_op(struct aead_requ
skb = create_wr_fn(req, u_ctx->lldi.rxq_ids[ctx->rx_qidx], size,
op_type);
- if (IS_ERR(skb) || !skb)
- return PTR_ERR(skb);
skb->dev = u_ctx->lldi.ports[0];
set_wr_txq(skb, CPL_PRIORITY_DATA, ctx->tx_qidx);
diff -u -p /var/linuxes/linux-next/fs/ocfs2/acl.c
/tmp/nothing/fs/ocfs2/acl.c
--- /var/linuxes/linux-next/fs/ocfs2/acl.c
+++ /tmp/nothing/fs/ocfs2/acl.c
@@ -331,8 +331,6 @@ int ocfs2_acl_chmod(struct inode *inode,
return 0;
acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh);
- if (IS_ERR(acl) || !acl)
- return PTR_ERR(acl);
ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode);
if (ret)
return ret;
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
>
