Hi,
On 16-07-17 16:04, Andy Shevchenko wrote:
On Thu, 2017-07-13 at 15:45 +0200, Hans de Goede wrote:
At least the Acer Iconia Tab8 / aka W1-810 uses 1MiHz instead of
1MHz for one of its busses, fix this up to 1MHz instead of failing
the probe of that bus.
This fixes the accelerometer on the Acer Iconia Tab8 not working.
Should it have a Fixes tag?
No I don't think so, as this worksaround a firmware bug the original
commit introducing the check is not really fixed by this, as the
original commit is fine really.
Regards,
Hans
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
(on condition Jarkko and Wolfram are okay with this; in the future it
would be better to have a list of possible speeds and algo that chooses
one based on FW configuration)
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
b/drivers/i2c/busses/i2c-designware-platdrv.c
index d139b156f9c9..143a8fd582b4 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -298,6 +298,9 @@ static int dw_i2c_plat_probe(struct
platform_device *pdev)
}
acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
+ /* Some broken DSTDs use 1MiHz instead of 1MHz */
+ if (acpi_speed == 1048576)
+ acpi_speed = 1000000;
/*
* Find bus speed from the "clock-frequency" device property,
ACPI
* or by using fast mode if neither is set.
