On Sat, 2017-07-08 at 15:10 +0200, Hans de Goede wrote: > At least the Acer Iconia Tab8 / aka W1-810 uses 1MiHz instead of > 1MHz for one of its busses, fix this up to 1MHz instead of failing > the probe of that bus. > > This fixes the accelerometer on the Acer Iconia Tab8 not working. > > Cc: stable@xxxxxxxxxxxxxxx > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c > b/drivers/i2c/busses/i2c-designware-platdrv.c > index d5acaf8d65bf..c6f5a41d72b5 100644 > --- a/drivers/i2c/busses/i2c-designware-platdrv.c > +++ b/drivers/i2c/busses/i2c-designware-platdrv.c > @@ -254,6 +254,9 @@ static int dw_i2c_plat_probe(struct > platform_device *pdev) > } > > acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev); > + /* Some broken DSTDs use 1MiHz instead of 1MHz */ > + if (acpi_speed == 1048576) > + acpi_speed = 1000000; I would rather convert to choose closest one, though I am not sure at all which approach would be better in long term. > /* > * Find bus speed from the "clock-frequency" device property, > ACPI > * or by using fast mode if neither is set. -- Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Intel Finland Oy
