[PATCH 2/2] i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



At least the Acer Iconia Tab8 / aka W1-810 uses 1MiHz instead of
1MHz for one of its busses, fix this up to 1MHz instead of failing
the probe of that bus.

This fixes the accelerometer on the Acer Iconia Tab8 not working.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d5acaf8d65bf..c6f5a41d72b5 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -254,6 +254,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	}
 
 	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
+	/* Some broken DSTDs use 1MiHz instead of 1MHz */
+	if (acpi_speed == 1048576)
+		acpi_speed = 1000000;
 	/*
 	 * Find bus speed from the "clock-frequency" device property, ACPI
 	 * or by using fast mode if neither is set.
-- 
2.13.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux