On 11 February 2016 at 18:26, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> * Ulf Hansson <ulf.hansson@xxxxxxxxxx> [160211 07:14]:
>> On 11 February 2016 at 16:02, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
>> > * Ulf Hansson <ulf.hansson@xxxxxxxxxx> [160211 02:19]:
>> >> On 11 February 2016 at 00:02, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
>> >> >
>> >> > Ulf, I'd like to merge this along with other related fixes via the
>> >> > ARM SoC tree if no objections, please review and ack if this look OK
>> >> > to you.
>> >>
>> >> I have some other omap_hsmmc patches queued for 4.6, so I prefer to
>> >> send this via my mmc tree.
>> >>
>> >> I guess that's okay as well!?
>> >
>> > Naturally yes, please go ahead thanks!
>>
>> Okay!
>>
>> BTW, did you notice my other comments to the patch?
>>
>> I can fix them before applying, unless you want to send a v2?
>
> Oh sorry, no I missed the rest of your comments again, I really
> need to recalibrate my reading habits obviously if I keep
> missing comments on regular basis..
>
> You comments make sense to me. Below is the patch with only
> minimal changes. Seems to work just fine and hit off mode for
> suspend too.
>
> Regards,
>
> Tony
>
> 8< -------------------
> From eb3c93421f01fb6198f76127262a92b527dd214c Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <tony@xxxxxxxxxxx>
> Date: Tue, 9 Feb 2016 09:31:10 -0800
> Subject: [PATCH] mmc: omap_hsmmc: Fix PM regression with deferred probe for
> pm_runtime_reinit
>
> Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
> error and driver unbind") introduced pm_runtime_reinit() that is used
> to reinitialize PM runtime after -EPROBE_DEFER. This allows shutting
> down the device after a failed probe.
>
> However, for drivers using pm_runtime_use_autosuspend() this can cause
> a state where suspend callback is never called after -EPROBE_DEFER.
> On the following device driver probe, hardware state is different from
> the PM runtime state causing omap_device to produce the following
> error:
>
> omap_device_enable() called from invalid state 1
>
> And with omap_device and omap hardware being picky for PM, this will
> block any deeper idle states in hardware.
>
> The solution is to fix the drivers to follow the PM runtime documentation:
>
> 1. For sections of code that needs the device disabled, use
> pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has
> been set.
>
> 2. For driver exit code, use pm_runtime_dont_use_autosuspend() before
> pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been
> set.
>
> Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
> error and driver unbind")
> Cc: linux-mmc@xxxxxxxxxxxxxxx
> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
> Cc: Nishanth Menon <nm@xxxxxx>
> Cc: Rafael J. Wysocki <rafael@xxxxxxxxxx>
> Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> Cc: Tero Kristo <t-kristo@xxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -2232,6 +2232,7 @@ err_irq:
> dma_release_channel(host->tx_chan);
> if (host->rx_chan)
> dma_release_channel(host->rx_chan);
> + pm_runtime_dont_use_autosuspend(host->dev);
> pm_runtime_put_sync(host->dev);
> pm_runtime_disable(host->dev);
> if (host->dbclk)
> @@ -2253,6 +2254,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
> dma_release_channel(host->tx_chan);
> dma_release_channel(host->rx_chan);
>
> + pm_runtime_dont_use_autosuspend(host->dev);
> pm_runtime_put_sync(host->dev);
> pm_runtime_disable(host->dev);
> device_init_wakeup(&pdev->dev, false);
Thanks, applied for fixes!
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
