On 11 February 2016 at 00:02, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
> error and driver unbind") introduced pm_runtime_reinit() that is used
> to reinitialize PM runtime after -EPROBE_DEFER. This allows shutting
> down the device after a failed probe.
>
> However, for drivers using pm_runtime_use_autosuspend() this can cause
> a state where suspend callback is never called after -EPROBE_DEFER.
> On the following device driver probe, hardware state is different from
> the PM runtime state causing omap_device to produce the following
> error:
>
> omap_device_enable() called from invalid state 1
>
> And with omap_device and omap hardware being picky for PM, this will
> block any deeper idle states in hardware.
>
> The solution is to fix the drivers to follow the PM runtime documentation:
>
> 1. For sections of code that needs the device disabled, use
> pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has
> been set.
>
> 2. For driver exit code, use pm_runtime_dont_use_autosuspend() before
> pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been
> set.
>
> Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
> error and driver unbind")
> Cc: linux-mmc@xxxxxxxxxxxxxxx
> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
> Cc: Nishanth Menon <nm@xxxxxx>
> Cc: Rafael J. Wysocki <rafael@xxxxxxxxxx>
> Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> Cc: Tero Kristo <t-kristo@xxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
>
> Ulf, I'd like to merge this along with other related fixes via the
> ARM SoC tree if no objections, please review and ack if this look OK
> to you.
I have some other omap_hsmmc patches queued for 4.6, so I prefer to
send this via my mmc tree.
I guess that's okay as well!?
>
> ---
> drivers/mmc/host/omap_hsmmc.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index b6639ea..32bc112 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -1247,7 +1247,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
> int ret;
>
> /* Disable the clocks */
> - pm_runtime_put_sync(host->dev);
> + pm_runtime_put_sync_suspend(host->dev);
This has no effect.
The mmc core holds a runtime PM usage count for the device anyway, so
the clock won't be disabled.
Please remove this change from the patch.
> if (host->dbclk)
> clk_disable_unprepare(host->dbclk);
>
> @@ -2232,6 +2232,7 @@ err_irq:
> dma_release_channel(host->tx_chan);
> if (host->rx_chan)
> dma_release_channel(host->rx_chan);
> + pm_runtime_dont_use_autosuspend(host->dev);
> pm_runtime_put_sync(host->dev);
> pm_runtime_disable(host->dev);
> if (host->dbclk)
> @@ -2253,6 +2254,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
> dma_release_channel(host->tx_chan);
> dma_release_channel(host->rx_chan);
>
> + pm_runtime_dont_use_autosuspend(host->dev);
> pm_runtime_put_sync(host->dev);
> pm_runtime_disable(host->dev);
> device_init_wakeup(&pdev->dev, false);
> @@ -2285,7 +2287,7 @@ static int omap_hsmmc_suspend(struct device *dev)
> if (host->dbclk)
> clk_disable_unprepare(host->dbclk);
>
> - pm_runtime_put_sync(host->dev);
> + pm_runtime_put_sync_suspend(host->dev);
This has no effect, as the PM core prevents runtime suspend during the
system PM phase.
It does so, by increasing the runtime PM usage count
(pm_runtime_get_noresume()).
Please remove this change from patch.
> return 0;
> }
>
> --
> 2.7.0
>
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
