Hi,
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 2ac87fa..6afc17e 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1021,4 +1021,14 @@ config SCx200_ACB
> This support is also available as a module. If so, the module
> will be called scx200_acb.
>
> +config I2C_DLN2
> + tristate "Diolan DLN-2 USB I2C adapter"
> + depends on MFD_DLN2
> + help
> + If you say yes to this option, support will be included for Diolan
> + DLN2, a USB to I2C interface.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i2c-dln2.
> +
Please keep to the existing sorting.
> endmenu
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 49bf07e..3118fea 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -100,5 +100,6 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
> obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
> obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
> obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
> +obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
Ditto!
> +static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable)
> +{
> + int ret;
> + u16 cmd;
> +
> + if (enable)
> + cmd = DLN2_I2C_ENABLE;
> + else
> + cmd = DLN2_I2C_DISABLE;
Ternary operator?
> +
> + ret = dln2_transfer(dln2->pdev, cmd, &dln2->port, sizeof(dln2->port),
> + NULL, NULL);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int dln2_i2c_set_frequency(struct dln2_i2c *dln2, u32 freq)
Here you have 'set_frequency'...
> +{
> + int ret;
> + struct tx_data {
> + u8 port;
> + __le32 freq;
> + } __packed tx;
> +
> + tx.port = dln2->port;
> + tx.freq = cpu_to_le32(freq);
> +
> + ret = dln2_transfer(dln2->pdev, DLN2_I2C_SET_FREQUENCY, &tx, sizeof(tx),
> + NULL, NULL);
> + if (ret < 0)
> + return ret;
> +
> + dln2->freq = freq;
> +
> + return 0;
> +}
> +
> +static int dln2_i2c_get_freq(struct dln2_i2c *dln2, u16 cmd, u32 *res)
... here 'get_freq'. Please keep it consistent.
> +{
> + int ret;
> + __le32 freq;
> + unsigned len = sizeof(freq);
> +
> + ret = dln2_transfer(dln2->pdev, cmd, &dln2->port, sizeof(dln2->port),
> + &freq, &len);
> + if (ret < 0)
> + return ret;
> + if (len < sizeof(freq))
> + return -EPROTO;
> +
> + *res = le32_to_cpu(freq);
> +
> + return 0;
> +}
...
> +
> +static int dln2_i2c_xfer(struct i2c_adapter *adapter,
> + struct i2c_msg *msgs, int num)
> +{
> + struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
> + struct i2c_msg *pmsg;
> + int i;
> +
> + for (i = 0; i < num; i++) {
> + int ret;
> +
> + pmsg = &msgs[i];
> +
> + if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE)
> + return -EINVAL;
Rather -EOPNOTSUPP. And we should add a warning here since I2C transfers
can be bigger than 256 byte and this is a flaw of the controller.
> +
> + if (pmsg->flags & I2C_M_RD) {
> + ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
> + pmsg->len);
> + if (ret < 0)
> + return ret;
> +
> + pmsg->len = ret;
> + } else {
> + ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf,
> + pmsg->len);
> + if (ret != pmsg->len)
> + return -EPROTO;
> + }
> + }
> +
> + return num;
> +}
> +
Thanks,
Wolfram
Attachment:
signature.asc
Description: Digital signature
