Re: [PATCH v3] i2c-ali1535: enable SPARC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 25/11/2011 14:23, Jean Delvare a écrit :
> From: "corentin.labbe" <corentin.labbe@xxxxxxxxxxx>
> 
> The i2c-ali1535 driver don't work on SPARC, this is because it assumes that ioport address are 16bits wide (address stored with an unsigned short).
> But on SPARC arch, ioports are mapped in memory and so are stored with an unsigned long.
> 
> This patch corrects this by using pci_resource_start for getting IOMEM base address, then reading the SMBBA of the i2c busse and using together for I/O access.
> 
> I like to thanks Jean DELVARE for reviewing of my patch.
> 
> Signed-off-by: LABBE Corentin <corentin.labbe@xxxxxxxxxxx>
> Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
> ---
> Corentin, I rebased your patch so that it applies on top of the fix I
> just sent. I also turned one dev_info into dev_dbg, and relaxed the
> check on the PCI resource flags: I have no idea if the resource is
> always defined, in particular on x86, and as it will be difficult to
> find testers, I want to play it safe and guarantee that the driver will
> behave the same way it used to before your patch.
> 
> Corentin, Pierre-Yves, please test this version of the patch on top of
> the fix I just sent, and confirm that it works for you.

It works for me.

Thanks for your work.

> 
> If anybody is using the i2c-ali1535 driver on x86, please test too and
> report. I can provide a standalone driver if needed.
> 
>  drivers/i2c/busses/i2c-ali1535.c |   27 ++++++++++++++++++++-------
>  1 file changed, 20 insertions(+), 7 deletions(-)
> 
> --- linux-3.2-rc3.orig/drivers/i2c/busses/i2c-ali1535.c	2011-11-25 13:54:48.000000000 +0100
> +++ linux-3.2-rc3/drivers/i2c/busses/i2c-ali1535.c	2011-11-25 14:12:46.000000000 +0100
> @@ -132,7 +132,8 @@
>  #define	ALI1535_SMBIO_EN	0x04	/* SMB I/O Space enable		*/
>  
>  static struct pci_driver ali1535_driver;
> -static unsigned short ali1535_smba;
> +static unsigned long ali1535_smba;
> +static unsigned short ali1535_offset;
>  
>  /* Detect whether a ALI1535 can be found, and initialize it, where necessary.
>     Note the differences between kernels with the old PCI BIOS interface and
> @@ -149,16 +150,28 @@ static int __devinit ali1535_setup(struc
>  		- We can use the addresses
>  	*/
>  
> +	retval = pci_enable_device(dev);
> +	if (retval) {
> +		dev_err(&dev->dev, "ALI1535_smb can't enable device\n");
> +		goto exit;
> +	}
> +
>  	/* Determine the address of the SMBus area */
> -	pci_read_config_word(dev, SMBBA, &ali1535_smba);
> -	ali1535_smba &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
> -	if (ali1535_smba == 0) {
> +	pci_read_config_word(dev, SMBBA, &ali1535_offset);
> +	dev_dbg(&dev->dev, "ALI1535_smb is at offset 0x%04x\n", ali1535_offset);
> +	ali1535_offset &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1));
> +	if (ali1535_offset == 0) {
>  		dev_warn(&dev->dev,
>  			"ALI1535_smb region uninitialized - upgrade BIOS?\n");
>  		retval = -ENODEV;
>  		goto exit;
>  	}
>  
> +	if (pci_resource_flags(dev, 0) & IORESOURCE_IO)
> +		ali1535_smba = pci_resource_start(dev, 0) + ali1535_offset;
> +	else
> +		ali1535_smba = ali1535_offset;
> +
>  	retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE,
>  				   ali1535_driver.name);
>  	if (retval)
> @@ -166,7 +179,7 @@ static int __devinit ali1535_setup(struc
>  
>  	if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
>  			    ali1535_driver.name)) {
> -		dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
> +		dev_err(&dev->dev, "ALI1535_smb region 0x%lx already in use!\n",
>  			ali1535_smba);
>  		retval = -EBUSY;
>  		goto exit;
> @@ -200,7 +213,7 @@ static int __devinit ali1535_setup(struc
>  	*/
>  	pci_read_config_byte(dev, SMBREV, &temp);
>  	dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
> -	dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba);
> +	dev_dbg(&dev->dev, "ALI1535_smba = 0x%lx\n", ali1535_smba);
>  
>  	return 0;
>  
> @@ -501,7 +514,7 @@ static int __devinit ali1535_probe(struc
>  	ali1535_adapter.dev.parent = &dev->dev;
>  
>  	snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
> -		"SMBus ALI1535 adapter at %04x", ali1535_smba);
> +		"SMBus ALI1535 adapter at %04x", ali1535_offset);
>  	return i2c_add_adapter(&ali1535_adapter);
>  }
>  
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux