[PATCH v2 22/22] i2c-designware: Cosmetic cleanups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@xxxxxxxxx>
---
drivers/i2c/busses/i2c-designware.c |   27 ++++++++++++++-------------
1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index 887aed6..4534d45 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -1,5 +1,5 @@
/*
- * Synopsys Designware I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver (master only).
 *
 * Based on the TI DAVINCI I2C adapter driver.
 *
@@ -145,27 +145,27 @@
					 DW_IC_TX_ABRT_GCALL_NOACK)

static char *abort_sources[] = {
-	[ABRT_7B_ADDR_NOACK]	=
+	[ABRT_7B_ADDR_NOACK] =
		"slave address not acknowledged (7bit mode)",
-	[ABRT_10ADDR1_NOACK]	=
+	[ABRT_10ADDR1_NOACK] =
		"first address byte not acknowledged (10bit mode)",
-	[ABRT_10ADDR2_NOACK]	=
+	[ABRT_10ADDR2_NOACK] =
		"second address byte not acknowledged (10bit mode)",
-	[ABRT_TXDATA_NOACK]		=
+	[ABRT_TXDATA_NOACK] =
		"data not acknowledged",
-	[ABRT_GCALL_NOACK]		=
+	[ABRT_GCALL_NOACK] =
		"no acknowledgement for a general call",
-	[ABRT_GCALL_READ]		=
+	[ABRT_GCALL_READ] =
		"read after general call",
-	[ABRT_SBYTE_ACKDET]		=
+	[ABRT_SBYTE_ACKDET] =
		"start byte acknowledged",
-	[ABRT_SBYTE_NORSTRT]	=
+	[ABRT_SBYTE_NORSTRT] =
		"trying to send start byte when restart is disabled",
-	[ABRT_10B_RD_NORSTRT]	=
+	[ABRT_10B_RD_NORSTRT] =
		"trying to read when restart is disabled (10bit mode)",
-	[ARB_MASTER_DIS]		=
+	[ABRT_MASTER_DIS] =
		"trying to use disabled adapter",
-	[ARB_LOST]			=
+	[ARB_LOST] =
		"lost arbitration",
};

@@ -394,7 +394,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
	intr_mask = DW_IC_INTR_DEFAULT_MASK;

	for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
-		/* if target address has changed, we need to
+		/*
+		 * if target address has changed, we need to
		 * reprogram the target address in the i2c
		 * adapter when we are done with this transfer
		 */
--
1.6.5.2

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux