Re: [PATCH/RFC 1/1] recover from davinci i2c time out conditions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Craig,

	Good to know. With out any modifications on a DM6443?

Regards,
Philby


On Fri, 2009-09-18 at 23:12 -0600, Craig Matsuura wrote:
> The patch submitted appears specific to the dm355. The changes are
> very similar to the 2.6.10 kernel from mv. If the correct gpio's and
> pinmux are disabled/enabled it should work for the dm644x. 
> 
> 
> 
> I took the patch from Philby and tried it on our dm6443 platform (on a
> 2.6.28 kernel) and it appears to work for the problem we have when the
> i2c appears to lock up.
> 
> 
> 
> Craig
> 
> 
> 
> 
> On Wednesday 22 July 2009 5:14:35 am Philby John wrote:
> > On Wed, 2009-07-22 at 04:03 -0700, Nitin Mahajan wrote:
> > > Hello,
> > >
> > > ----- Original Message ----
> > >
> > > > From: Philby John <pjohn@xxxxxxxxxxxxx>
> > > > To: linux-i2c@xxxxxxxxxxxxxxx
> > > > Cc: khali@xxxxxxxxxxxx;
> davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx
> > > > Sent: Wednesday, July 15, 2009 13:04:27
> > > > Subject: [PATCH/RFC 1/1] recover from davinci i2c time out
> conditions
> > > >
> > > > >From dbe7e824d576636bb15b82a20fd2557fddc9a8f7 Mon Sep 17
> 00:00:00 2001
> > > >
> > > > From: Philby John
> > > > Date: Tue, 14 Jul 2009 21:46:47 +0530
> > > > Subject: [PATCH] Reset i2c bus to come out of time out
> conditions
> > > >
> > > > Get out of i2c time out condition by resetting
> > > > the i2c bus. The kernel must be robust enough to
> > > > gracefully recover from i2c bus failure without having
> > > > to reset the machine. This is done by first NACKing the slave
> > > > and then resetting the i2c bus after a certain timeout.
> > > >
> > > > Signed-off-by: Philby John
> > >
> > > I tried this on DM6443 based board with 2.6.18 kernel. The result
> I am
> > > posting below. It gives controller time out again and again.
> > >
> > > dhcppc9 login: i2c_davinci i2c_davinci.1: controller timed out
> > > i2c_davinci i2c_davinci.1: initiating i2c bus recovery
> > > i2c_davinci i2c_davinci.1: controller timed out
> > > i2c_davinci i2c_davinci.1: initiating i2c bus recovery
> >
> > There is something gravely wrong about this patch and I would submit
> a
> > fix shortly incorporating the review comments. But please be aware
> that
> > I do not guarantee a definitive time line for a fix cause I have
> much at
> > hand at the moment.
> >
> >
> > Regards,
> > Philby
> >
> >
> > _______________________________________________
> > Davinci-linux-open-source mailing list
> > Davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx
> >
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> 
> -- 
> 
> 
> 
> 
> 
> ______________________________________________________________________
> 
> 
> Craig Matsuura - Principal Engineer
> Control4
> 11734 South Election Road - Suite 200
> Salt Lake City, UT 84020-6432
> PH: 801-523-3161
> FX: 801-523-3199
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux