Hi!
> >> > +static void decode_report(struct synaptics_ts_data *ts, u8 *buf)
> >> > +{
> >>
> >> some documentation about this logic would be great.
> >
> > Arve, can you help here?
>
> This sensor sends two 6-byte absolute finger reports, an optional
> 2-byte relative report followed by a status byte
> (http://www.synaptics.com/sites/default/files/511_000099_01F.pdf).
> This function reads the two finger reports and transforms the
> coordinates according the platform data so they can be aligned with
> the lcd behind the touchscreen. typically we flip the y-axis since the
> sensor uses the bottom left corner as the origin, but if the sensor is
> mounted upside down the platform data will request that the x-axis
> should be flipped instead. The snap to inactive edge border are used
> to allow tapping the edges of the screen on the G1. The active area of
> the touchscreen is smaller than the lcd. When the finger gets close
> the edge of the screen we snap it to the edge. This allows ui elements
> at the edge of the screen to be hit, and it prevents hitting ui
> elements that are not at the edge of the screen when the finger is
> touching the edge.
Thanks. I added it like this:
diff --git a/drivers/input/touchscreen/synaptics_i2c_rmi.c b/drivers/input/touchscreen/synaptics_i2c_rmi.c
index 771b710..3ff62b1 100644
--- a/drivers/input/touchscreen/synaptics_i2c_rmi.c
+++ b/drivers/input/touchscreen/synaptics_i2c_rmi.c
@@ -13,6 +13,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
+ * http://www.synaptics.com/sites/default/files/511_000099_01F.pdf
*/
#include <linux/module.h>
@@ -87,6 +87,22 @@ static int synaptics_init_panel(struct synaptics_ts_data *ts)
static void decode_report(struct synaptics_ts_data *ts, u8 *buf)
{
+/*
+ * This sensor sends two 6-byte absolute finger reports, an optional
+ * 2-byte relative report followed by a status byte. This function
+ * reads the two finger reports and transforms the coordinates
+ * according the platform data so they can be aligned with the lcd
+ * behind the touchscreen. Typically we flip the y-axis since the
+ * sensor uses the bottom left corner as the origin, but if the sensor
+ * is mounted upside down the platform data will request that the
+ * x-axis should be flipped instead. The snap to inactive edge border
+ * are used to allow tapping the edges of the screen on the G1. The
+ * active area of the touchscreen is smaller than the lcd. When the
+ * finger gets close the edge of the screen we snap it to the
+ * edge. This allows ui elements at the edge of the screen to be hit,
+ * and it prevents hitting ui elements that are not at the edge of the
+ * screen when the finger is touching the edge.
+ */
int pos[2][2];
int f, a;
int base = 2;
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
