Philby, That will be great! I will look for it. Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 Phone : 301-515-3736 email: m-karicheri2@xxxxxx >-----Original Message----- >From: Philby John [mailto:pjohn@xxxxxxxxxxxxx] >Sent: Wednesday, July 15, 2009 3:29 AM >To: Karicheri, Muralidharan >Cc: Kevin Hilman; Ben Dooks; davinci-linux-open- >source@xxxxxxxxxxxxxxxxxxxx; linux-i2c@xxxxxxxxxxxxxxx >Subject: RE: [PATCH 0/2] davinci i2c fixes for 2.6.31 > >Hello Murali, > > I will send a patch out to address this problem. > >Regards, >Philby > > >On Wed, 2009-07-08 at 10:25 -0500, Karicheri, Muralidharan wrote: >> Hi Kevin, >> >> When we do a video loopback with MT9T031, we get i2c timeouts when >application is killed using Cntrl C. Is it being addressed in any of the >patches? We had the same issue with TI LSP releases (1.20, 2.00, 2.1o etc). >> The board has to be rebooted to recover from this. >> >> Murali Karicheri >> Software Design Engineer >> Texas Instruments Inc. >> Germantown, MD 20874 >> Phone : 301-515-3736 >> email: m-karicheri2@xxxxxx >> >> >-----Original Message----- >> >From: davinci-linux-open-source-bounces+m- >> >karicheri2=ti.com@xxxxxxxxxxxxxxxxxxxx [mailto:davinci-linux-open- >source- >> >bounces+m-karicheri2=ti.com@xxxxxxxxxxxxxxxxxxxx] On Behalf Of Kevin >Hilman >> >Sent: Wednesday, July 08, 2009 9:30 AM >> >To: Ben Dooks >> >Cc: davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx; linux- >> >i2c@xxxxxxxxxxxxxxx >> >Subject: Re: [PATCH 0/2] davinci i2c fixes for 2.6.31 >> > >> >Ben Dooks <ben-linux@xxxxxxxxx> writes: >> > >> >> On Mon, Jul 06, 2009 at 03:48:34PM -0700, Kevin Hilman wrote: >> >>> Here are a couple fixes for the i2c driver on the TI DaVinci family >> >>> of SoCs. These have been tested for awhile in the DaVinci git >> >>> repo are needed for 2.6.31. >> >>> >> >>> These apply on v2.6.31-rc2. >> >> >> >> ok, do you have a git branch to pull, or should I apply >> >> them from the mailing list> >> > >> >You can take from the list. My git branch has a bunch of other >> >non-i2c changes in it as well. >> > >> >Thanks, >> > >> >Kevin >> > >> >>> David Brownell (1): >> >>> i2c-davinci: behave with i2cdetect >> >>> >> >>> Kevin Hilman (1): >> >>> i2c-davinci: convert clock usage after clkdev conversion >> >>> >> >>> drivers/i2c/busses/i2c-davinci.c | 20 +++++++++++++++----- >> >>> 1 files changed, 15 insertions(+), 5 deletions(-) >> >>> >> >>> -- >> >>> To unsubscribe from this list: send the line "unsubscribe linux-i2c" >in >> >>> the body of a message to majordomo@xxxxxxxxxxxxxxx >> >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >> >> -- >> >> Ben (ben@xxxxxxxxx, http://www.fluff.org/) >> >> >> >> 'a smiley only costs 4 bytes' >> > >> >_______________________________________________ >> >Davinci-linux-open-source mailing list >> >Davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx >> >http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source >> _______________________________________________ >> Davinci-linux-open-source mailing list >> Davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx >> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
