Re: build issue #15 for v2.6.31-rc1 : build failure of i2c-designware.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Toralf,

On Thu, 25 Jun 2009 14:57:06 +0200, Toralf Förster wrote:
> Hello,
> 
> the build (.config attached) failed, make ends with :
> ...
>   CC      drivers/w1/slaves/w1_ds2433.o
>   CC      drivers/w1/slaves/w1_ds2760.o
> drivers/video/s1d13xxxfb.c:421: warning: 'bltbit_wait_bitset' defined but not used
> drivers/video/s1d13xxxfb.c:464: warning: 'bltbit_fifo_status' defined but not used
>   CC      drivers/video/carminefb.o
>   CC      drivers/w1/slaves/w1_bq27000.o
>   LD      drivers/w1/slaves/built-in.o
>   LD      drivers/w1/wire.o
>   LD      drivers/w1/built-in.o
>   CC      drivers/video/vfb.o
>   CC      drivers/video/output.o
>   LD      drivers/video/fb.o
>   LD      drivers/video/built-in.o
>   LD      drivers/built-in.o
>   LD      vmlinux.o
>   MODPOST vmlinux.o
> WARNING: modpost: Found 8 section mismatch(es).
> To see full details build your kernel with:
> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
>   GEN     .version
>   CHK     include/linux/compile.h
>   UPD     include/linux/compile.h
>   CC      init/version.o
>   LD      init/built-in.o
>   LD      .tmp_vmlinux1
> drivers/built-in.o: In function `i2c_dw_init':
> i2c-designware.c:(.text+0x4ddcc2): undefined reference to `clk_get_rate'
> drivers/built-in.o: In function `dw_i2c_probe':
> i2c-designware.c:(.devinit.text+0x50200): undefined reference to `clk_get'
> i2c-designware.c:(.devinit.text+0x5021d): undefined reference to `clk_enable'
> i2c-designware.c:(.devinit.text+0x50349): undefined reference to `clk_disable'
> i2c-designware.c:(.devinit.text+0x50354): undefined reference to `clk_put'
> drivers/built-in.o: In function `dw_i2c_remove':
> i2c-designware.c:(.devexit.text+0x5cba): undefined reference to `clk_disable'
> i2c-designware.c:(.devexit.text+0x5cc5): undefined reference to `clk_put'
> make: *** [.tmp_vmlinux1] Error 1
> 
> The build was made with :
> $>make randconfig; make clean; make

Thanks for reporting. Already fixed, please see:
http://marc.info/?l=linux-i2c&m=124592430920676&w=2

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux