Hi all, I am working on omap3430 custom board with linux-omap-2.6 (2.6.28-omap1 tag) on it. I am using twl4030 power buttom. Whenever I press the power key I get i2c controller timed out. I am seeing following logs and the keypad stops responding and I have to remove the board supply completely. i2c_omap i2c_omap.1: controller timed out i2c_omap i2c_omap.1: controller timed out twl4030: I2C error -110 reading PIH ISR i2c_omap i2c_omap.1: controller timed out twl4030: I2C error -110 reading PIH ISR i2c_omap i2c_omap.1: controller timed out twl4030: I2C error -110 reading PIH ISR i2c_omap i2c_omap.1: controller timed out When I enabled the logs I could see twl4030: i2c error -110 while reading TWL4030 PM_MASTER STS_HW_CONDITIONS register The behavior is seen mostly with power-button key. Is there any fix that has gone into the kernel for this(after 2.6.28-omap1)? -- Best Regards Pramod -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html