Re: [PATCH 08/12] mpc5121: Added I2C support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@xxxxxxx> wrote:
> From: Piotr Ziecik <kosmo@xxxxxxxxxxxx>
>
> - Enabled I2C interrupts on MPC5121.
> - Updated Kconfig for i2c-mpc driver.

I think this workaround belongs in the driver itself.

g.

>
> Signed-off-by: Piotr Ziecik <kosmo@xxxxxxxxxxxx>
> Signed-off-by: Wolfgang Denk <wd@xxxxxxx>
> Cc: <linux-i2c@xxxxxxxxxxxxxxx>
> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
> Cc: John Rigby <jcrigby@xxxxxxxxx>
> ---
>  arch/powerpc/platforms/512x/mpc5121_ads.c    |    2 ++
>  arch/powerpc/platforms/512x/mpc512x.h        |    1 +
>  arch/powerpc/platforms/512x/mpc512x_shared.c |   24 ++++++++++++++++++++++++
>  drivers/i2c/busses/Kconfig                   |    9 +++++----
>  4 files changed, 32 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
> index 441abc4..a8976b4 100644
> --- a/arch/powerpc/platforms/512x/mpc5121_ads.c
> +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
> @@ -42,6 +42,8 @@ static void __init mpc5121_ads_setup_arch(void)
>        for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
>                mpc83xx_add_bridge(np);
>  #endif
> +
> +       mpc512x_init_i2c();
>  }
>
>  static void __init mpc5121_ads_init_IRQ(void)
> diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
> index 9c03693..f4db8a7 100644
> --- a/arch/powerpc/platforms/512x/mpc512x.h
> +++ b/arch/powerpc/platforms/512x/mpc512x.h
> @@ -13,5 +13,6 @@
>  #define __MPC512X_H__
>  extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
>  extern void __init mpc512x_init_IRQ(void);
> +extern void __init mpc512x_init_i2c(void);
>  void __init mpc512x_declare_of_platform_devices(void);
>  #endif                         /* __MPC512X_H__ */
> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
> index 7135d89..b776e45 100644
> --- a/arch/powerpc/platforms/512x/mpc512x_shared.c
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -65,6 +65,30 @@ void __init mpc512x_init_IRQ(void)
>        ipic_set_default_priority();
>  }
>
> +void __init mpc512x_init_i2c(void)
> +{
> +       struct device_node *np;
> +       void __iomem *i2cctl;
> +
> +       /* Enable I2C interrupts */
> +       np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-i2c-ctrl");
> +       if (np) {
> +               i2cctl = of_iomap(np, 0);
> +               if (i2cctl) {
> +                       /*
> +                        * Set interrupt enable bits:
> +                        *  - I2C-0: bit 24,
> +                        *  - I2C-1: bit 26,
> +                        *  - I2C-2: bit 28.
> +                        */
> +                       out_be32(i2cctl, 0x15000000);
> +                       iounmap(i2cctl);
> +               }
> +
> +               of_node_put(np);
> +       }
> +}
> +
>  /*
>  * Nodes to do bus probe on, soc and localbus
>  */
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index a48c8ae..57ed637 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -391,13 +391,14 @@ config I2C_IXP2000
>          instead.
>
>  config I2C_MPC
> -       tristate "MPC107/824x/85xx/52xx/86xx"
> +       tristate "MPC107/824x/85xx/512x/52xx/86xx"
>        depends on PPC32
>        help
>          If you say yes to this option, support will be included for the
> -         built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
> -         MPC85xx/MPC8641 family processors. The driver may also work on 52xx
> -         family processors, though interrupts are known not to work.
> +         built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245,
> +         MPC85xx/MPC8641 and MPC512x family processors. The driver may
> +         also work on 52xx family processors, though interrupts are known
> +         not to work.
>
>          This driver can also be built as a module.  If so, the module
>          will be called i2c-mpc.
> --
> 1.6.0.6
>
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux