During standby some PSUs turn off the microcontroller. A re-init is
required during resume or the microcontroller stays unresponsive.
Fixes: 726c945ab2eb ("hwmon: (corsair-psu) Remove unneeded semicolons")
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxx>
---
drivers/hwmon/corsair-psu.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
index 02298b86b57b..731d5117f9f1 100644
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *repo
return 0;
}
+#ifdef CONFIG_PM
+static int corsairpsu_resume(struct hid_device *hdev)
+{
+ struct corsairpsu_data *priv = hid_get_drvdata(hdev);
+
+ /* some PSUs turn off the microcontroller during standby, so a reinit is required */
+ return corsairpsu_init(priv);
+}
+#endif
+
static const struct hid_device_id corsairpsu_idtable[] = {
{ HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
{ HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
@@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = {
.probe = corsairpsu_probe,
.remove = corsairpsu_remove,
.raw_event = corsairpsu_raw_event,
+#ifdef CONFIG_PM
+ .resume = corsairpsu_resume,
+ .reset_resume = corsairpsu_resume,
+#endif
};
module_hid_driver(corsairpsu_driver);
--
2.31.1
