On Thu, Jun 03, 2021 at 05:23:38AM +0000, Wilken Gottwalt wrote:
> During standby some PSUs turn off the microcontroller. A re-init is
> required during resume or the microcontroller stays unresponsive.
>
> Fixes: 726c945ab2eb ("hwmon: (corsair-psu) Remove unneeded semicolons")
That seems wrong. Removing semicolons doesn't typically introduce resume bugs.
This should fix the patch introducing the driver.
Guenter
> Signed-off-by: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxx>
> ---
> drivers/hwmon/corsair-psu.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> index 02298b86b57b..731d5117f9f1 100644
> --- a/drivers/hwmon/corsair-psu.c
> +++ b/drivers/hwmon/corsair-psu.c
> @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *repo
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int corsairpsu_resume(struct hid_device *hdev)
> +{
> + struct corsairpsu_data *priv = hid_get_drvdata(hdev);
> +
> + /* some PSUs turn off the microcontroller during standby, so a reinit is required */
> + return corsairpsu_init(priv);
> +}
> +#endif
> +
> static const struct hid_device_id corsairpsu_idtable[] = {
> { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
> { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
> @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = {
> .probe = corsairpsu_probe,
> .remove = corsairpsu_remove,
> .raw_event = corsairpsu_raw_event,
> +#ifdef CONFIG_PM
> + .resume = corsairpsu_resume,
> + .reset_resume = corsairpsu_resume,
> +#endif
> };
> module_hid_driver(corsairpsu_driver);
>
> --
> 2.31.1
>
