Re: [PATCH 4/6] pinctrl: bcm: Add pinconf/pinmux controller driver for BCM2712

[Andrea della Porta <andrea.porta@xxxxxxxx>]

On 09:19 Sun 14 Apr     , Christophe JAILLET wrote:
> Le 14/04/2024 à 00:14, Andrea della Porta a écrit :
> > Add a pincontrol driver for BCM2712. BCM2712 allows muxing GPIOs
> > and setting configuration on pads.
> > 
> > Originally-by: Jonathan Bell <jonathan@xxxxxxxxxxxxxxx>
> > Originally-by: Phil Elwell <phil@xxxxxxxxxxxxxxx>
> > Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
> > ---
> >   drivers/pinctrl/bcm/Kconfig           |    9 +
> >   drivers/pinctrl/bcm/Makefile          |    1 +
> >   drivers/pinctrl/bcm/pinctrl-bcm2712.c | 1247 +++++++++++++++++++++++++
> >   3 files changed, 1257 insertions(+)
> >   create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2712.c
> 
> ...
> 
> > +static int bcm2712_pmx_get_function_groups(struct pinctrl_dev *pctldev,
> > +		unsigned selector,
> > +		const char * const **groups,
> > +		unsigned * const num_groups)
> > +{
> > +	struct bcm2712_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
> 
> Missing empty new line.
> 
> > +	/* every pin can do every function */
> > +	*groups = pc->gpio_groups;
> > +	*num_groups = pc->pctl_desc.npins;
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int bcm2712_pinconf_get(struct pinctrl_dev *pctldev,
> > +			unsigned pin, unsigned long *config)
> > +{
> > +	struct bcm2712_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
> > +	enum pin_config_param param = pinconf_to_config_param(*config);
> > +	u32 arg;
> > +
> > +	switch (param) {
> > +	case PIN_CONFIG_BIAS_DISABLE:
> > +		arg = (bcm2712_pull_config_get(pc, pin) == BCM2712_PULL_NONE);
> > +		break;
> > +	case PIN_CONFIG_BIAS_PULL_DOWN:
> > +		arg = (bcm2712_pull_config_get(pc, pin) == BCM2712_PULL_DOWN);
> > +		break;
> > +	case PIN_CONFIG_BIAS_PULL_UP:
> > +		arg = (bcm2712_pull_config_get(pc, pin) == BCM2712_PULL_UP);
> > +		break;
> > +	default:
> > +		return -ENOTSUPP;
> > +	}
> > +
> > +	*config = pinconf_to_config_packed(param, arg);
> > +
> > +	return -ENOTSUPP;
> 
> Strange.
> 
> 	return 0;
> ?
> 
> > +}
> > +
> > +static int bcm2712_pinconf_set(struct pinctrl_dev *pctldev,
> > +			       unsigned int pin, unsigned long *configs,
> > +			       unsigned int num_configs)
> > +{
> > +	struct bcm2712_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
> > +	u32 param, arg;
> > +	int i;
> > +
> > +	for (i = 0; i < num_configs; i++) {
> > +		param = pinconf_to_config_param(configs[i]);
> > +		arg = pinconf_to_config_argument(configs[i]);
> > +
> > +		switch (param) {
> > +		case PIN_CONFIG_BIAS_DISABLE:
> > +			bcm2712_pull_config_set(pc, pin, BCM2712_PULL_NONE);
> > +			break;
> > +		case PIN_CONFIG_BIAS_PULL_DOWN:
> > +			bcm2712_pull_config_set(pc, pin, BCM2712_PULL_DOWN);
> > +			break;
> > +		case PIN_CONFIG_BIAS_PULL_UP:
> > +			bcm2712_pull_config_set(pc, pin, BCM2712_PULL_UP);
> > +			break;
> > +		default:
> > +			return -ENOTSUPP;
> > +		}
> > +	} /* for each config */
> 
> This comment is not really usefull, IMHO.

Agreed. Dropped in V2.

> 
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int bcm2712_pinctrl_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	//struct device_node *np = dev->of_node;
> > +	const struct bcm_plat_data *pdata;
> > +	//const struct of_device_id *match;
> > +	struct bcm2712_pinctrl *pc;
> > +	const char **names;
> > +	int num_pins, i;
> > +
> > +	pdata = device_get_match_data(&pdev->dev);
> > +	if (!pdata)
> > +		return -EINVAL;
> > +
> > +	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
> > +	if (!pc)
> > +		return -ENOMEM;
> > +
> > +	platform_set_drvdata(pdev, pc);
> > +	pc->dev = dev;
> > +	spin_lock_init(&pc->lock);
> > +
> > +	//pc->base = devm_of_iomap(dev, np, 0, NULL);
> 
> Any use for this commented code? (and variable declarations above)

No, I just forgot to drop the comment. Removed in V2.

Many thanks,
Andrea

> 
> CJ
> 
> > +	pc->base = devm_platform_ioremap_resource(pdev, 0);
> > +	if (WARN_ON(IS_ERR(pc->base))) {
> > +		//dev_err(dev, "could not get IO memory\n");
> > +		return PTR_ERR(pc->base);
> > +	}
> > +
> > +	pc->pctl_desc = *pdata->pctl_desc;
> > +	num_pins = pc->pctl_desc.npins;
> > +	names = devm_kmalloc_array(dev, num_pins, sizeof(const char *),
> > +				   GFP_KERNEL);
> > +	if (!names)
> > +		return -ENOMEM;
> > +	for (i = 0; i < num_pins; i++)
> > +		names[i] = pc->pctl_desc.pins[i].name;
> > +	pc->gpio_groups = names;
> > +	pc->pin_regs = pdata->pin_regs;
> > +	pc->pin_funcs = pdata->pin_funcs;
> > +	pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
> > +	if (IS_ERR(pc->pctl_dev))
> > +		return PTR_ERR(pc->pctl_dev);
> > +
> > +	pc->gpio_range = *pdata->gpio_range;
> > +	pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
> > +
> > +	return 0;
> > +}
> 
> ...
>