On 4/13/2024 3:14 PM, Andrea della Porta wrote:
Add a pincontrol driver for BCM2712. BCM2712 allows muxing GPIOs and setting configuration on pads. Originally-by: Jonathan Bell <jonathan@xxxxxxxxxxxxxxx> Originally-by: Phil Elwell <phil@xxxxxxxxxxxxxxx>
Is that a new tag in a comment message? Signed-off-by maybe?
Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx> ---
Was not pinctrl-single usable somehow that we had to go through a dedicated pinctrl driver?
drivers/pinctrl/bcm/Kconfig | 9 + drivers/pinctrl/bcm/Makefile | 1 + drivers/pinctrl/bcm/pinctrl-bcm2712.c | 1247 +++++++++++++++++++++++++ 3 files changed, 1257 insertions(+) create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2712.c diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig index 35b51ce4298e..62ede44460bc 100644 --- a/drivers/pinctrl/bcm/Kconfig +++ b/drivers/pinctrl/bcm/Kconfig @@ -3,6 +3,15 @@ # Broadcom pinctrl drivers #+config PINCTRL_BCM2712+ bool "Broadcom BCM2712 PINCONF driver" + depends on OF && (ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST) + select PINMUX + select PINCONF + select GENERIC_PINCONF
Rename to PINCTRL_BRCMSTB sicne this is not BCM2712 specific at all.
+ help + Say Y here to enable the Broadcom BCM2712 PINCONF driver. + config PINCTRL_BCM281XX bool "Broadcom BCM281xx pinctrl driver" depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST) diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile index 82b868ec1471..d298e4785829 100644 --- a/drivers/pinctrl/bcm/Makefile +++ b/drivers/pinctrl/bcm/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Broadcom pinctrl support+obj-$(CONFIG_PINCTRL_BCM2712) += pinctrl-bcm2712.o
Likewise.
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BCM4908) += pinctrl-bcm4908.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2712.c b/drivers/pinctrl/bcm/pinctrl-bcm2712.c
new file mode 100644
index 000000000000..f9359e9eff14
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2712.c
@@ -0,0 +1,1247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Broadcom BCM2712 GPIO units (pinctrl only)
+ *
+ * Copyright (C) 2021-3 Raspberry Pi Ltd.
+ * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
+ *
+ * Based heavily on the BCM2835 GPIO & pinctrl driver, which was inspired by:
+ * pinctrl-nomadik.c, please see original file for copyright information
+ * pinctrl-tegra.c, please see original file for copyright information
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define MODULE_NAME "pinctrl-bcm2712"
+
+/* Register offsets */
+
+#define BCM2712_PULL_NONE 0
+#define BCM2712_PULL_DOWN 1
+#define BCM2712_PULL_UP 2
+#define BCM2712_PULL_MASK 0x3
+
+#define BCM2712_FSEL_COUNT 9
+#define BCM2712_FSEL_MASK 0xf
+
+#define FUNC(f) \
+ [func_##f] = #f
+#define PIN(i, f1, f2, f3, f4, f5, f6, f7, f8) \
+ [i] = { \
+ .funcs = { \
+ func_##f1, \
+ func_##f2, \
+ func_##f3, \
+ func_##f4, \
+ func_##f5, \
+ func_##f6, \
+ func_##f7, \
+ func_##f8, \
+ }, \
+ }
+
+#define MUX_BIT_VALID 0x8000
+#define REG_BIT_INVALID 0xffff
+
+#define BIT_TO_REG(b) (((b) >> 5) << 2)
+#define BIT_TO_SHIFT(b) ((b) & 0x1f)
+
+#define MUX_BIT(mr, mb) (MUX_BIT_VALID + ((mr)*4)*8 + (mb)*4)
+#define GPIO_REGS(n, mr, mb, pr, pb) \
+ [n] = { MUX_BIT(mr, mb), ((pr)*4)*8 + (pb)*2 }
+
+#define EMMC_REGS(n, pr, pb) \
+ [n] = { 0, ((pr)*4)*8 + (pb)*2 }
+
+#define AGPIO_REGS(n, mr, mb, pr, pb) \
+ [n] = { MUX_BIT(mr, mb), ((pr)*4)*8 + (pb)*2 }
+
+#define SGPIO_REGS(n, mr, mb) \
+ [n+32] = { MUX_BIT(mr, mb), REG_BIT_INVALID }
+
+#define GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
+#define AGPIO_PIN(a) PINCTRL_PIN(a, "aon_gpio" #a)
+#define SGPIO_PIN(a) PINCTRL_PIN(a+32, "aon_sgpio" #a)
+
+struct pin_regs {
+ u16 mux_bit;
+ u16 pad_bit;
+};
+
+struct bcm2712_pinctrl {
+ struct device *dev;
+ void __iomem *base;
+ struct pinctrl_dev *pctl_dev;
+ struct pinctrl_desc pctl_desc;
+ const struct pin_regs *pin_regs;
+ const struct bcm2712_pin_funcs *pin_funcs;
+ const char *const *gpio_groups;
+ struct pinctrl_gpio_range gpio_range;
+ spinlock_t lock;
+};
Please s/bcm2712/brcmstb/ throughout the driver's structures and any declaration that is not inherently 2712 specific and just make 2712 the first instance using this driver.
+
+struct bcm_plat_data {
+ const struct pinctrl_desc *pctl_desc;
+ const struct pinctrl_gpio_range *gpio_range;
+ const struct pin_regs *pin_regs;
+ const struct bcm2712_pin_funcs *pin_funcs;
+};
+
+struct bcm2712_pin_funcs {
+ u8 funcs[BCM2712_FSEL_COUNT - 1];
+};
+
[snip]
+static int bcm2712_pinctrl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ //struct device_node *np = dev->of_node;
+ const struct bcm_plat_data *pdata;
+ //const struct of_device_id *match;
+ struct bcm2712_pinctrl *pc;
+ const char **names;
+ int num_pins, i;
+
+ pdata = device_get_match_data(&pdev->dev);
+ if (!pdata)
+ return -EINVAL;
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pc);
+ pc->dev = dev;
+ spin_lock_init(&pc->lock);
+
+ //pc->base = devm_of_iomap(dev, np, 0, NULL);
Remove stray commented lines.
+ pc->base = devm_platform_ioremap_resource(pdev, 0);
+ if (WARN_ON(IS_ERR(pc->base))) {
+ //dev_err(dev, "could not get IO memory\n");
+ return PTR_ERR(pc->base);
+ }
+
+ pc->pctl_desc = *pdata->pctl_desc;
+ num_pins = pc->pctl_desc.npins;
+ names = devm_kmalloc_array(dev, num_pins, sizeof(const char *),
+ GFP_KERNEL);
+ if (!names)
+ return -ENOMEM;
+ for (i = 0; i < num_pins; i++)
+ names[i] = pc->pctl_desc.pins[i].name;
+ pc->gpio_groups = names;
+ pc->pin_regs = pdata->pin_regs;
+ pc->pin_funcs = pdata->pin_funcs;
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
+ if (IS_ERR(pc->pctl_dev))
+ return PTR_ERR(pc->pctl_dev);
+
+ pc->gpio_range = *pdata->gpio_range;
+ pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
+
+ return 0;
+}
+
+static struct platform_driver bcm2712_pinctrl_driver = {
+ .probe = bcm2712_pinctrl_probe,
+ .driver = {
+ .name = MODULE_NAME,
+ .of_match_table = bcm2712_pinctrl_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(bcm2712_pinctrl_driver);
There is no MODULE_LICENSE(), MODULE_AUTHOR() or MODULE_DESCRIPTION(), please provide some.
-- Florian
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
