Re: [PATCH 3/4] arm64: dts: nuvoton: Add pinctrl support for ma35d1

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 13/10/2023 08:52, Jacky Huang wrote:
>>> +
>>> +&pinctrl {
>>> +	uart0 {
>>> +		pinctrl_uart0: uart0grp {
>>> +			nuvoton,pins =
>>> +				<MA35_SYS_REG_GPE_H 24 1 &pcfg_default>,
>>> +				<MA35_SYS_REG_GPE_H 28 1 &pcfg_default>;
>> This does not look like generic pinctrl bindings. Looks
>> over-complicated. From where did you get it? Which recent bindings and
>> drivers where used as an example? Register addresses should be in the
>> driver. Bit offsets as well. "multi-pin-function-value" confuses me. All
>> this is not really suitable for DTS.
> 
> Okay, I will update the first and second items to 'pin bank' and 'pin 
> bank index,
> just as others have done, and leave the driver to handle the conversion into
> registers and offsets.

Instead use existing common properties, like "pins" and "groups" (or
pinmux).

> 
> The term "multi-pin-function-value" is used to specify the device function.
> I will use the name "device function" instead of "multi-pin-function-value.

Use existing common properties, like "function". Do not reinvent the
bindings.



Best regards,
Krzysztof