Re: [PATCH RFC] gpio: Add Virtual Aggregator GPIO Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 5, 2019 at 12:21 PM Marc Zyngier <marc.zyngier@xxxxxxx> wrote:
> On 01/08/2019 09:41, Linus Walleij wrote:

> > I would even go so far as to call it "gpio-virtualization" or
> > "gpio-virtualized" rather than "gpio-virtual" so it is clear what the
> > intended usecase is. We have a bit of confusion in the kernel
> > because people misuse the word "virtual" left and right, like for
> > "virtual IRQ number" (Linux IRQ numbers) which are just some
> > random number space, but not really "virtual", it's a semantic
> > disease similar to the confusion of using the word "manual" in
> > computer code.
>
> I'd drop the notion of "virtual" altogether. Nothing is virtual in this
> thing at all (the GPIOs are very real, from what I gather). Instead (and
> assuming I got it right, which is a long shot), what you have is a
> "synthetic" GPIO controller, made from the GPIOs belonging to other
> controllers. I'd call it "GPIO aggregator".

+1 on this.

Next thing that will predictably follow is a userspace ABI to
create those aggregators and have them go away if the
process creating it dies. Something to think of...

> > If QEMU can deal in a simple and straight-forward way with this
> > I see it quickly becoming a very useful tool for industrial automation
> > where you want to run each control system in isolation and just
> > respawn the virtual machine if something goes wrong.
>
> What the VMM (QEMU, kvmtool) would need to do is to present this as a
> "standard" GPIO IP, and use the backend aggregator to emulate it.
> Certainly doable. The nice part is that all the work is in userspace,
> and thus completely off my plate! ;-)

Yeah there is not really any "standard" GPIO, but if the user is running
e.g. a Versatile Express model, that has a PL061 GPIO, and then
a user would create an "aggregator GPIO" with say 8 lines and
QEMU would pick that up as /dev/gpiochipN and bind it inside
of QEMU to the lines of the virttualized PL061 GPIO controller,
so the machine thinks it is using a PL061 but in reality it is
just 8 GPIO lines on the host computer.

> You also may want to look into not emulating a standard IP, but use
> something virtio-based instead. The ACRN project seems to have something
> like this in progress, but I know nothing about it.

That sounds quite interesting as well.

Then the virtualized machine can just pick this "virtio GPIO" and
some command line switches or config file on the host can
set up and route a GPIO aggregator.

Yours,
Linus Walleij



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux