Re: [PATCH v7 01/20] pinctrl: tegra: Add suspend and resume support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



01.08.2019 0:10, Sowjanya Komatineni пишет:
> This patch adds support for Tegra pinctrl driver suspend and resume.
> 
> During suspend, context of all pinctrl registers are stored and
> on resume they are all restored to have all the pinmux and pad
> configuration for normal operation.
> 
> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
> Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
>  drivers/pinctrl/tegra/pinctrl-tegra.c | 59 +++++++++++++++++++++++++++++++++++
>  drivers/pinctrl/tegra/pinctrl-tegra.h |  3 ++
>  2 files changed, 62 insertions(+)
> 
> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
> index 186ef98e7b2b..e3a237534281 100644
> --- a/drivers/pinctrl/tegra/pinctrl-tegra.c
> +++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
> @@ -631,6 +631,58 @@ static void tegra_pinctrl_clear_parked_bits(struct tegra_pmx *pmx)
>  	}
>  }
>  
> +static size_t tegra_pinctrl_get_bank_size(struct device *dev,
> +					  unsigned int bank_id)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct resource *res;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, bank_id);
> +
> +	return resource_size(res) / 4;
> +}
> +
> +static int tegra_pinctrl_suspend(struct device *dev)
> +{
> +	struct tegra_pmx *pmx = dev_get_drvdata(dev);
> +	u32 *backup_regs = pmx->backup_regs;
> +	u32 *regs;
> +	size_t bank_size;
> +	unsigned int i, k;
> +
> +	for (i = 0; i < pmx->nbanks; i++) {
> +		bank_size = tegra_pinctrl_get_bank_size(dev, i);
> +		regs = pmx->regs[i];
> +		for (k = 0; k < bank_size; k++)
> +			*backup_regs++ = readl_relaxed(regs++);
> +	}
> +
> +	return pinctrl_force_sleep(pmx->pctl);
> +}
> +
> +static int tegra_pinctrl_resume(struct device *dev)
> +{
> +	struct tegra_pmx *pmx = dev_get_drvdata(dev);
> +	u32 *backup_regs = pmx->backup_regs;
> +	u32 *regs;
> +	size_t bank_size;
> +	unsigned int i, k;
> +
> +	for (i = 0; i < pmx->nbanks; i++) {
> +		bank_size = tegra_pinctrl_get_bank_size(dev, i);
> +		regs = pmx->regs[i];
> +		for (k = 0; k < bank_size; k++)
> +			writel_relaxed(*backup_regs++, regs++);
> +	}

I'm now curious whether any kind of barrier is needed after the
writings. The pmx_writel() doesn't insert a barrier after the write and
seems it just misuses writel, which actually should be writel_relaxed()
+ barrier, IIUC.

It's also not obvious whether PINCTRL HW has any kind of write-FIFO and
thus maybe read-back + rmb() is needed in order ensure that writes are
actually completed.

The last thing which is not obvious is when the new configuration
actually takes into effect, does it happen immediately or maybe some
delay is needed?

[snip]



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux