Re: [PATCH] drivers: gpio: pca953x: add compatibility for pcal6524 and pcal9555a

[Andy Shevchenko <andy.shevchenko@xxxxxxxxx>]

On Wed, Mar 14, 2018 at 2:39 PM, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> wrote:
>> Am 13.03.2018 um 17:56 schrieb Andy Shevchenko <andy.shevchenko@xxxxxxxxx>:
>> On Sat, Mar 10, 2018 at 1:00 PM, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> wrote:

>> What does L means in the model code?
>
> Good question. The data sheets don't tell. But 6424 and 6524 are not identical
> from register set and overall functions, although quite similar.
> Only for pin and package.
>
> As far as I understand the 6524 (and all PCAL) have additional interrupt
> latch mechanisms and registers so that it is possible to disable each
> I/O pin individually as an interrupt while for the 6424 they are always
> enabled. Maybe this is the "L" designator.

IIRC "L" stands for the "Latch" as you correctly described above.

> But we aren't using interrupts yet.

Are you planning? Or let's put it this way: does the hardware support it?

>> Perhaps we need to rename PCA_PCAL to be more specific?
>
> My assumption is that it should be there for all PCAL variants,
> but I think the original author who introduced this constant should know.

>     The original patch was submitted by
>     Josef Ahmad <josef.ahmad@xxxxxxxxxxxxxxx>
>     http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-quark/tree/recipes-kernel/linux/files/0015-Quark-GPIO-1-2-quark.patch

I'm not sure we can reach to Josef (at least easily). So, better to
rely on official datasheets.

>>> +       { .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_INT), },
>>> +       { .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_INT), },
>>
>> Other way around, you missed PCA_PCAL in the second case.
>
> Ah, ok. It wasn't clear how these flag relate to the i2c table because they
> are hidden by a macro here. I'd assume that PCA_PCAL is missing for both.

Yep, if HW supports it.

> So it might be that we run the pcal6524 in non-PCAL mode because we use DT.
> I can do a test as soon as I have access to the hardware.

Please, do.

-- 
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html