Re: [PATCH 5/6] ARM: dts: stm32: add joystick support on stm32746g-eval

[Amelie DELAUNAY <amelie.delaunay@xxxxxx>]

On 02/22/2018 02:52 PM, Linus Walleij wrote:
> Hi Amelie,
> 
> thanks for your patch.
> 
> On Thu, Feb 8, 2018 at 3:27 PM, Amelie Delaunay <amelie.delaunay@xxxxxx> wrote:
> 
>> The joystick on stm32746g-eval uses gpios on MFX gpio expander.
>>
>> Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
> (...)
>> +       joystick {
>> +               compatible = "gpio-keys";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               button@1 {
>> +                       label = "JoySel";
>> +                       linux,code = <KEY_ENTER>;
>> +                       gpios = <&mfxgpio 0 (GPIO_ACTIVE_LOW | GPIO_IN_PUSH_PULL | GPIO_PULL_UP)>;
>> +               };
> 
> As I think this should not all be handled by GPIO, the joystick on
> gpio-keys needs a pin control handle pointing back to pin control
> states on the respective pins in the pin control/GPIO driver,
> where it can set up these properties.
> 
> For the individual lines the pushing and pulling flags should be
> removed.
> 

Sure! I keep this in mind, thanks!

Regards,
Amelie

> Yours,
> Linus Walleij
> ��.n��������+%������w��{.n�����{��
b���ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f