This patch adds documentation of device tree bindings for the STMicroelectronics Multi-Function eXpander (MFX). Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx> --- Documentation/devicetree/bindings/mfd/st-mfx.txt | 51 ++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/st-mfx.txt diff --git a/Documentation/devicetree/bindings/mfd/st-mfx.txt b/Documentation/devicetree/bindings/mfd/st-mfx.txt new file mode 100644 index 0000000..423d800 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st-mfx.txt @@ -0,0 +1,51 @@ +STMicroelectronics Multi-Function eXpander + +ST Multi-Function eXpander (MFX) is a slave controller using I2C for +communication with the main MCU. Its main features are gpio expansion, main +MCU IDD measurement (IDD is the amount of current that flows through VDD) +and resistive touchscreen controller. + +Required properties: +- compatible: must be "st,mfx" +- reg: I2C address of the device +- interrupts: interrupt triggered by MFX_IRQ_OUT signal +- interrupt-parent: interrupt controller MFX is connected to +- interrupt-controller: marks the device as an interrupt controller +- #interrupt-cells: should be <1>, index of the interrupt within the + controller, in accordance with the "one cell" variant of + <devicetree/bindings/interrupt-controller/interrupt.txt> + +Optional nodes: + +* GPIO eXpander +MFX provides 16 programmable GPIOs, and it is also possible to recover 8 +alternate GPIOs if the main functions are not used (touchscreen controller and +IDD measurement not enabled). + +Required properties: +- compatible : must be "st,mfx-gpio" +- interrupt-parent : must be <&mfx> +- interrupts = must be <0> +- gpio-controller: marks the device node as a GPIO controller +- #gpio-cells: should be <2>, the first cell is the GPIO offset on this GPIO + controller, the second cell is the gpio flags in accordance with + <dt-bindings/gpio/st-mfx-gpio.h>. + +Example: + + mfx: mfx@42 { + compatible = "st,mfx"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + interrupt-controller; + #interrupt-cells = <1>; + + mfxgpio: mfx_gpio { + compatible = "st,mfx-gpio"; + interrupt-parent = <&mfx>; + interrupts = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html