UART pin lists consist GPIO numbers which is simply wrong. Replace it by pin numbers. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/pinctrl/intel/pinctrl-merrifield.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c index 4d4ef42a39b5..86c4b3fab7b0 100644 --- a/drivers/pinctrl/intel/pinctrl-merrifield.c +++ b/drivers/pinctrl/intel/pinctrl-merrifield.c @@ -343,9 +343,9 @@ static const struct pinctrl_pin_desc mrfld_pins[] = { static const unsigned int mrfld_sdio_pins[] = { 50, 51, 52, 53, 54, 55, 56 }; static const unsigned int mrfld_spi5_pins[] = { 90, 91, 92, 93, 94, 95, 96 }; -static const unsigned int mrfld_uart0_pins[] = { 124, 125, 126, 127 }; -static const unsigned int mrfld_uart1_pins[] = { 128, 129, 130, 131 }; -static const unsigned int mrfld_uart2_pins[] = { 132, 133, 134, 135 }; +static const unsigned int mrfld_uart0_pins[] = { 115, 116, 117, 118 }; +static const unsigned int mrfld_uart1_pins[] = { 119, 120, 121, 122 }; +static const unsigned int mrfld_uart2_pins[] = { 123, 124, 125, 126 }; static const unsigned int mrfld_pwm0_pins[] = { 144 }; static const unsigned int mrfld_pwm1_pins[] = { 145 }; static const unsigned int mrfld_pwm2_pins[] = { 132 }; -- 2.13.2 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html