Re: [PATCH v5 0/3] TPS68470 PMIC drivers

["Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>]

On Friday, July 21, 2017 06:20:15 PM Andy Shevchenko wrote:
> On Fri, Jul 21, 2017 at 5:46 PM, Rajmohan Mani <rajmohan.mani@xxxxxxxxx> wrote:
> > This is the patch series for TPS68470 PMIC that works as a camera PMIC.
> >
> > The patch series provide the following 3 drivers, to help configure the voltage regulators, clocks and GPIOs provided by the TPS68470 PMIC, to be able to use the camera sensors connected to this PMIC.
> >
> > TPS68470 MFD driver:
> > This is the multi function driver that initializes the TPS68470 PMIC and supports the GPIO and Op Region functions.
> >
> > TPS68470 GPIO driver:
> > This is the PMIC GPIO driver that will be used by the OS GPIO layer, when the BIOS / firmware triggered GPIO access is done.
> >
> > TPS68470 Op Region driver:
> > This is the driver that will be invoked, when the BIOS / firmware configures the voltage / clock for the sensors / vcm devices connected to the PMIC.
> >
> 
> All three patches are good to me (we did few rounds of internal review
> before posting v4)
> 
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

OK, so how should they be routed?

Thanks,
Rafael

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html