Re: [PATCH v5 0/3] TPS68470 PMIC drivers

[Andy Shevchenko <andy.shevchenko@xxxxxxxxx>]

On Fri, Jul 21, 2017 at 5:46 PM, Rajmohan Mani <rajmohan.mani@xxxxxxxxx> wrote:
> This is the patch series for TPS68470 PMIC that works as a camera PMIC.
>
> The patch series provide the following 3 drivers, to help configure the voltage regulators, clocks and GPIOs provided by the TPS68470 PMIC, to be able to use the camera sensors connected to this PMIC.
>
> TPS68470 MFD driver:
> This is the multi function driver that initializes the TPS68470 PMIC and supports the GPIO and Op Region functions.
>
> TPS68470 GPIO driver:
> This is the PMIC GPIO driver that will be used by the OS GPIO layer, when the BIOS / firmware triggered GPIO access is done.
>
> TPS68470 Op Region driver:
> This is the driver that will be invoked, when the BIOS / firmware configures the voltage / clock for the sensors / vcm devices connected to the PMIC.
>

All three patches are good to me (we did few rounds of internal review
before posting v4)

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> ---
>
> Update on 2 GPIO chips implementation over 1:
>         - Attempted to implement 2 GPIO chips, but ran into couple of
>           issues in the kernel, so we couldn't get it to work.
>         - It was decided to postpone this change, since it is not
>           critical
>
> Changes in v5:
>         - MFD driver:
>         - Fixed Kconfig description text
>         - Addressed other comments from Lee, related to formatting
>
>         - GPIO driver:
>         - Formatted the file header text
>
>         - Opregion driver:
>         - Formatted the file header text
>
> Changes in v4:
>         - MFD driver:
>         - Removed board specific code and FIXME comment
>         - Moved i2c.h include from tps68470.h to tps68470.c
>         - Moved the TPS68470 REVID read code after PMIC reset
>         - Fixed typo in debug error message (on failure of
>           devm_mfd_add_devices() )
>         - Enhanced dependency on I2C by changing it to I2C=y
>           (to fix build errors if I2C is built as module
>            e.g tps68470.c:71: undefined reference to `__devm_regmap_init_i2c'
>                tps68470.c:117: undefined reference to `i2c_register_driver')
>         - Removed most of the unused header file definitions
>         - Moved devm_mfd_add_devices() after PMIC resett
>         - Used probe_new() and removed i2c_device_id table
>
>           The following patch from Andy is needed for the driver to be
>           probed.
>           http://marc.info/?l=linux-acpi&m=150030081523885&w=2
>
>         - GPIO driver:
>         - Added newline at the end of Kconfig description
>         - Updated commit message about the descriptive
>           names for the GPIOs and the typical usage model
>           of the GPIO driver
>
>         - Opregion driver:
>         - Added dependency on MFD_TPS68470
>         - Converted 2 liner into one line code
>
> Changes in v3:
>         - MFD driver:
>         - Removed GPIO lookup table
>         - Reverted to probe() for consistency
>         - Addressed other comments from Andy
>
>         - GPIO driver:
>         - Removed the code that initializes the default values
>           of GPIOs to zeros
>         - Used gpiochip_get_data() to access data inside the gpio_chip
>
> Changes in v2:
>         - MFD driver:
>         - Removed tps68470_* wrappers around regmap_* calls
>         - Removed "struct tps68470"
>         - used devm_mfd_add_devices and removed mutex in mfd driver
>         - Added reasoning about the need of having mfd driver
>           as bool/builtin
>
>         - Opregion driver:
>         - renamed opregion driver file / internal symbol names
>           with tps68470_pmic*
>         - Made opregion driver tables as const
>         - Removed unused *handler_context in common handler
>         - Replaced "int" with "unsigned int"
>         - Changed to WARN macro to dev_warn()
>         - Destroyed mutex on error
>         - Added reasoning about the need of having Opregion driver
>           as bool/builtin
>
>         - GPIO driver:
>         - Implemented get_direction() in the GPIO driver
>         - Setup gpio_chip.names
>         - Moved the GPIO lookup table code inside mfd driver
>         - Added reasoning about the need of having GPIO driver
>           as bool/builtin
>
> ---
>
> Rajmohan Mani (3):
>   mfd: Add new mfd device TPS68470
>   gpio: Add support for TPS68470 GPIOs
>   ACPI / PMIC: Add TI PMIC TPS68470 operation region driver
>
>  drivers/acpi/Kconfig              |  16 ++
>  drivers/acpi/Makefile             |   2 +
>  drivers/acpi/pmic/tps68470_pmic.c | 455 ++++++++++++++++++++++++++++++++++++++
>  drivers/gpio/Kconfig              |  15 ++
>  drivers/gpio/Makefile             |   1 +
>  drivers/gpio/gpio-tps68470.c      | 176 +++++++++++++++
>  drivers/mfd/Kconfig               |  18 ++
>  drivers/mfd/Makefile              |   1 +
>  drivers/mfd/tps68470.c            | 106 +++++++++
>  include/linux/mfd/tps68470.h      |  97 ++++++++
>  10 files changed, 887 insertions(+)
>  create mode 100644 drivers/acpi/pmic/tps68470_pmic.c
>  create mode 100644 drivers/gpio/gpio-tps68470.c
>  create mode 100644 drivers/mfd/tps68470.c
>  create mode 100644 include/linux/mfd/tps68470.h
>
> --
> 1.9.1
>



-- 
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html