Re: [PATCH 05/33] gpio: add generic single-register fixed-direction GPIO driver

[Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>]

On Mon, Sep 05, 2016 at 11:06:28AM +0200, Linus Walleij wrote:
> I couldn't resist testing on the Compaq iPAQ h3600. It works the
> same as before so:
> Tested-by: Linus Walleij <linus.walleij@xxxxxxxxxx> [for Compaq iPAQ H3600]

Great news.  I've been thinking about digging out my h3600, but it's
very old, and hasn't been turned on for many years.  I'm not sure what
state it's in.

I've been hoping to try booting some kernels with qemu-system-arm, but
so far I've completely failed to get qemu-system-arm to do anything
useful - it just sits there doing apparently nothing, irrespective of
which platform I choose or which kernel I give it.

> The only news in the bootlog is this:
> sa11x0-pcmcia: probe of sa11x0-pcmcia failed with error -2

Not so great news - that's -ENOENT.  Did that happen before these
changes?  That could be that the gpiod lookup table isn't found.
However, if that were the case, I'd have expected an error message
along the lines of:

Failed to get GPIO for xxx: -nnn

from soc_pcmcia_request_gpiods().  The other possibility is that
we're not getting to sa11x0_drv_pcmcia_legacy_probe() but instead
trying to initialise it as a generic sa11x0 socket, and
sa11x0_pcmcia_hw_init() is failing as a result.

We should be using the legacy probe on H3600, so sa11x0_pcmcia_hw_init()
should never be reached.

> This device does have a PCMCIA "sleeve" where I slotted in an
> ethernet card at one time to see if I could network this thing.
> But I never got the PCMCIA working. Now it seems like I could
> actually start looking into that as the driver gives its first sign
> of life.
> 
> I don't think PCMCIA ever worked on this thing upstream,
> but I have a copy of the old linux-handheld kernel tree where
> it supposedly was working at one point.

Well, the H3600 PCMCIA driver raises lots of "that can't be right"
questions for me, so I decided to leave most of the GPIO stuff alone
there, and just convert only the bits which made sense to me - the
detect and ready(irq) bits.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html