Re: [PATCH v2 2/9] drivers: irqchip: Add STM32 external interrupts support

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Thu, Mar 31, 2016 at 5:09 PM, Maxime Coquelin
<mcoquelin.stm32@xxxxxxxxx> wrote:

> +       gc = domain->gc->gc[0];
> +       gc->reg_base                         = base;
> +       gc->chip_types->type               = IRQ_TYPE_EDGE_BOTH;
> +       gc->chip_types->chip.name          = gc->chip_types[0].chip.name;
> +       gc->chip_types->chip.irq_ack       = irq_gc_ack_set_bit;
> +       gc->chip_types->chip.irq_mask      = irq_gc_mask_clr_bit;
> +       gc->chip_types->chip.irq_unmask    = irq_gc_mask_set_bit;
> +       gc->chip_types->chip.irq_set_type  = stm32_irq_set_type;
> +       gc->chip_types->chip.irq_set_wake  = stm32_irq_set_wake;
> +       gc->chip_types->regs.ack           = EXTI_PR;
> +       gc->chip_types->regs.mask          = EXTI_IMR;
> +       gc->chip_types->handler            = handle_edge_irq;

If this is used by a GPIO chip (as happens in another part of
the series), you need to set up the .irq_request_resources()
and .irq_release_resources() to call gpiochip_lock_as_irq()
and gpiochip_unlock_as_irq().

As with the other comment on the GPIO patch, the separation
of concerns between irqchip and gpiochip is a bit artificial
here and breaks down somewhat.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html