These patches synchronize the driver with the current state in the Analog Devices Linux tree: https://github.com/analogdevicesinc/linux/ They have been in the tree for about 2-3, so they did receive some testing. Highlights are: * Add support for fractional dividers (Lars-Peter Clausen) * Enable support for ZynqMP (UltraScale) (Dragos Bogdan) * Support frequency limits for ZynqMP (Mathias Tausen) - And continued by Mircea Caprioru, to read them from the IP cores Changelog v1 -> v2: - in patch 'include: fpga: adi-axi-common.h: add definitions for supported FPGAs' * converted enums to #define * added Intel FPGA definitions * added Device-Package definitions * added INTEL / XILINX in the define names definitions according to: https://github.com/analogdevicesinc/hdl/blob/4e438261aa319b1dda4c593c155218a93b1d869b/library/scripts/adi_intel_device_info_enc.tcl https://github.com/analogdevicesinc/hdl/blob/4e438261aa319b1dda4c593c155218a93b1d869b/library/scripts/adi_xilinx_device_info_enc.tcl Dragos Bogdan (1): clk: axi-clkgen: add support for ZynqMP (UltraScale) Lars-Peter Clausen (2): clk: axi-clkgen: Add support for fractional dividers clk: axi-clkgen: Set power bits for fractional mode Mathias Tausen (1): clk: axi-clkgen: Respect ZYNQMP PFD/VCO frequency limits Mircea Caprioru (2): include: fpga: adi-axi-common.h: add definitions for supported FPGAs clk: axi-clkgen: Add support for FPGA info drivers/clk/Kconfig | 2 +- drivers/clk/clk-axi-clkgen.c | 253 ++++++++++++++++++++++------ include/linux/fpga/adi-axi-common.h | 103 +++++++++++ 3 files changed, 302 insertions(+), 56 deletions(-) -- 2.17.1
