On Mon, Aug 10, 2020 at 4:41 PM Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote: > > These patches synchronize the driver with the current state in the > Analog Devices Linux tree: > https://github.com/analogdevicesinc/linux/ > > They have been in the tree for about 2-3, so they did receive some > testing. Ping on this series. Do I need to do a re-send? > > Highlights are: > * Add support for fractional dividers (Lars-Peter Clausen) > * Enable support for ZynqMP (UltraScale) (Dragos Bogdan) > * Support frequency limits for ZynqMP (Mathias Tausen) > - And continued by Mircea Caprioru, to read them from the IP cores > > Changelog v1 -> v2: > - in patch 'include: fpga: adi-axi-common.h: add definitions for supported FPGAs' > * converted enums to #define > * added Intel FPGA definitions > * added Device-Package definitions > * added INTEL / XILINX in the define names > definitions according to: > https://github.com/analogdevicesinc/hdl/blob/4e438261aa319b1dda4c593c155218a93b1d869b/library/scripts/adi_intel_device_info_enc.tcl > https://github.com/analogdevicesinc/hdl/blob/4e438261aa319b1dda4c593c155218a93b1d869b/library/scripts/adi_xilinx_device_info_enc.tcl > > Dragos Bogdan (1): > clk: axi-clkgen: add support for ZynqMP (UltraScale) > > Lars-Peter Clausen (2): > clk: axi-clkgen: Add support for fractional dividers > clk: axi-clkgen: Set power bits for fractional mode > > Mathias Tausen (1): > clk: axi-clkgen: Respect ZYNQMP PFD/VCO frequency limits > > Mircea Caprioru (2): > include: fpga: adi-axi-common.h: add definitions for supported FPGAs > clk: axi-clkgen: Add support for FPGA info > > drivers/clk/Kconfig | 2 +- > drivers/clk/clk-axi-clkgen.c | 253 ++++++++++++++++++++++------ > include/linux/fpga/adi-axi-common.h | 103 +++++++++++ > 3 files changed, 302 insertions(+), 56 deletions(-) > > -- > 2.17.1 >