From: Lars-Peter Clausen <lars@xxxxxxxxxx> Using the fractional dividers requires some additional power bits to be set. The fractional power bits are not documented and the current heuristic for setting them seems be insufficient for some cases. Just always set all the fractional power bits when in fractional mode. Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- drivers/clk/clk-axi-clkgen.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c index 1df03cc6d089..14d803e6af62 100644 --- a/drivers/clk/clk-axi-clkgen.c +++ b/drivers/clk/clk-axi-clkgen.c @@ -37,6 +37,7 @@ #define MMCM_REG_LOCK1 0x18 #define MMCM_REG_LOCK2 0x19 #define MMCM_REG_LOCK3 0x1a +#define MMCM_REG_POWER 0x28 #define MMCM_REG_FILTER1 0x4e #define MMCM_REG_FILTER2 0x4f @@ -320,6 +321,7 @@ static int axi_clkgen_set_rate(struct clk_hw *clk_hw, struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw); unsigned int d, m, dout; struct axi_clkgen_div_params params; + uint32_t power = 0; uint32_t filter; uint32_t lock; @@ -331,6 +333,11 @@ static int axi_clkgen_set_rate(struct clk_hw *clk_hw, if (d == 0 || dout == 0 || m == 0) return -EINVAL; + if ((dout & 0x7) != 0 || (m & 0x7) != 0) + power |= 0x9800; + + axi_clkgen_mmcm_write(axi_clkgen, MMCM_REG_POWER, power, 0x9800); + filter = axi_clkgen_lookup_filter(m - 1); lock = axi_clkgen_lookup_lock(m - 1); -- 2.17.1
