On Sun, Oct 31, 2021 at 10:16:18PM +0800, Eryu Guan wrote:
> On Tue, Oct 26, 2021 at 11:31:12AM +0200, Lukas Czerner wrote:
> > Add test to validate that all the ext4, ext3 and ext2 are properly
> > recognized, validate and applied to avoid regressions as ext4 moves to
> > the new mount API.
> >
> > Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
>
> I see the following failures when testing on kernel that doesn't have
> ext4 encryption configured
>
> +mounting ext2 "test_dummy_encryption" checking "test_dummy_encryption" (not found) FAILED
> +mounting ext2 "test_dummy_encryption=v1" checking "test_dummy_encryption=v1" (not found) FAILED
> +mounting ext2 "test_dummy_encryption=v2" checking "test_dummy_encryption=v2" (not found) FAILED
> +mounting ext2 "inlinecrypt" checking "inlinecrypt" (not found) FAILED
> +mounting ext3 "test_dummy_encryption" checking "test_dummy_encryption" (not found) FAILED
> +mounting ext3 "test_dummy_encryption=v1" checking "test_dummy_encryption=v1" (not found) FAILED
> +mounting ext3 "test_dummy_encryption=v2" checking "test_dummy_encryption=v2" (not found) FAILED
> +mounting ext3 "inlinecrypt" checking "inlinecrypt" (not found) FAILED
> +mounting ext4 "test_dummy_encryption" checking "test_dummy_encryption" (not found) FAILED
> +mounting ext4 "test_dummy_encryption=v1" checking "test_dummy_encryption=v1" (not found) FAILED
> +mounting ext4 "test_dummy_encryption=v2" checking "test_dummy_encryption=v2" (not found) FAILED
> +mounting ext4 "inlinecrypt" checking "inlinecrypt" (not found) FAILED
>
> It seems like we should check if CONFIG_FS_ENCRYPTION and
> CONFIG_FS_ENCRYPTION_INLINE_CRYPT have been configured.
Yeah, this is the same for CONFIG_EXT4_FS_POSIX_ACL and CONFIG_QFMT_V2
which means the I have to parse the kernel config to actually know if
it's configured in. Will fix it in the next version.
Thanks!
-Lukas
>
> Thanks,
> Eryu
>
> > ---
> > V2: Move minimum kernel version requirement up to 5.12
> > Rewrite kernel_gte() to work correctly
> > V3: Rename functions to not start with _
> >
> > tests/ext4/053 | 611 +++++++++++++++++++++++++++++++++++++++++++++
> > tests/ext4/053.out | 2 +
> > 2 files changed, 613 insertions(+)
> > create mode 100755 tests/ext4/053
> > create mode 100644 tests/ext4/053.out
> >
> > diff --git a/tests/ext4/053 b/tests/ext4/053
> > new file mode 100755
> > index 00000000..95b1c998
> > --- /dev/null
> > +++ b/tests/ext4/053
> > @@ -0,0 +1,611 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2021 Red Hat, Inc., Lukas Czerner <lczerner@xxxxxxxxxx>.
> > +#
> > +# FS QA Test 053
> > +#
> > +# Sanity check of ext4 mount options
> > +#
> > +. ./common/preamble
> > +_begin_fstest auto mount
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > + if [ -n "$LOOP_LOGDEV" ];then
> > + _destroy_loop_device $LOOP_LOGDEV 2>/dev/null
> > + fi
> > + rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +. ./common/quota
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +echo "Silence is golden."
> > +
> > +SIZE=$((1024 * 1024)) # 1GB in KB
> > +LOGSIZE=$((10 *1024)) # 10MB in KB
> > +
> > +_supported_fs ext2 ext3 ext4
> > +_require_scratch_size $SIZE
> > +_require_quota
> > +_require_loop
> > +_require_command "$TUNE2FS_PROG" tune2fs
> > +MKE2FS_PROG=$(type -P mke2fs)
> > +_require_command "$MKE2FS_PROG" mke2fs
> > +
> > +LOG=""
> > +print_log() {
> > + LOG="$LOG $@"
> > +}
> > +
> > +KERNEL_VERSION=`uname -r | cut -d'.' -f1,2`
> > +KERNEL_MAJ=${KERNEL_VERSION%.*}
> > +KERNEL_MIN=${KERNEL_VERSION#*.}
> > +
> > +kernel_gte() {
> > + major=${1%.*}
> > + minor=${1#*.}
> > +
> > + if [ $KERNEL_MAJ -gt $major ]; then
> > + return 0
> > + elif [[ $KERNEL_MAJ -eq $major && $KERNEL_MIN -ge $minor ]]; then
> > + return 0
> > + fi
> > + return 1
> > +}
> > +
> > +
> > +# The aim here is to keep the mount options behaviour stable going forward
> > +# so there is not much point in testing older kernels.
> > +kernel_gte 5.12 || _notrun "This test is only relevant for kernel versions 5.12 and higher"
> > +
> > +IGNORED="remount,defaults,ignored,removed"
> > +CHECK_MINFO="lazytime,noatime,nodiratime,noexec,nosuid,ro"
> > +ERR=0
> > +
> > +test_mnt() {
> > + findmnt -n $SCRATCH_DEV > /dev/null 2>&1
> > + [ $? -ne 0 ] && return $?
> > +
> > + if [ $# -eq 1 ]; then
> > + OPTS=$1
> > + elif [ $# -eq 2 ]; then
> > + OPTS=$2
> > + else
> > + return 0
> > + fi
> > +
> > + print_log "checking \"$OPTS\" "
> > + # test options in /proc/fs/ext4/dev/options
> > + (
> > + ret=0
> > + IFS=','
> > + for option in $OPTS; do
> > + if echo $IGNORED | grep -w $option; then
> > + continue
> > + fi
> > +
> > + [ $option = "noload" ] && option="norecovery"
> > +
> > + if [[ $option = ^* ]]; then
> > + expected=1
> > + else
> > + expected=0
> > + fi
> > + option=${option#^}
> > +
> > + if echo $CHECK_MINFO | grep -w $option; then
> > + findmnt -n -o OPTIONS $SCRATCH_DEV | grep $option
> > + ret=$?
> > + else
> > + grep $option /proc/fs/ext4/$(_short_dev $SCRATCH_DEV)/options
> > + ret=$?
> > + fi
> > +
> > + if [ $ret -ne $expected ]; then
> > + exit 1
> > + fi
> > + done
> > + ) > /dev/null 2>&1
> > + return $?
> > +}
> > +
> > +fail() {
> > + print_log " FAILED"
> > + ERR=$((ERR+1))
> > + echo $LOG | tee -a $seqres.full
> > + LOG=""
> > +}
> > +
> > +ok() {
> > + print_log " OK"
> > + echo $LOG >> $seqres.full
> > + LOG=""
> > +}
> > +
> > +simple_mount() {
> > + _mount $* >> $seqres.full 2>&1
> > +}
> > +
> > +# $1 - can hold -n option, if it does argumetns are shifted
> > +# $1 - options to test
> > +# $2 - if provided it's the option string to check for
> > +do_mnt() {
> > + device=$SCRATCH_DEV
> > + # If -n argument is provided do not specify $SCRATCH_DEV
> > + # usefull for remount
> > + if [ "$1" == "-n" ]; then
> > + unset device
> > + shift
> > + fi
> > +
> > + if [ -z "$1" ]; then
> > + simple_mount $device $SCRATCH_MNT
> > + ret=$?
> > + else
> > + simple_mount -o $1 $device $SCRATCH_MNT
> > + ret=$?
> > + fi
> > + if [ $ret -eq 0 ]; then
> > + test_mnt $1 $2
> > + ret=$?
> > + [ $ret -ne 0 ] && print_log "(not found)"
> > + else
> > + print_log "(failed mount)"
> > + fi
> > +
> > + return $ret
> > +}
> > +
> > +not_mnt() {
> > + # We don't need -t not not_ variant
> > + if [ "$1" == "-t" ]; then
> > + shift
> > + fi
> > +
> > + print_log "SHOULD FAIL mounting $fstype \"$1\" "
> > + do_mnt $@
> > + if [ $? -eq 0 ]; then
> > + fail
> > + else
> > + ok
> > + fi
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +}
> > +
> > +mnt_only() {
> > + print_log "mounting $fstype \"$1\" "
> > + do_mnt $@
> > + if [ $? -ne 0 ]; then
> > + fail
> > + else
> > + ok
> > + fi
> > +}
> > +
> > +mnt() {
> > + # Do we need to run the tune2fs mount option test ?
> > + t2fs=0
> > + if [ "$1" == "-t" ]; then
> > + t2fs=1
> > + shift
> > + fi
> > +
> > + mnt_only $*
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +
> > + [ "$t2fs" -eq 0 ] && return
> > +
> > + op_set=$1
> > + if [ $# -eq 1 ]; then
> > + check=$1
> > + elif [ $# -eq 2 ]; then
> > + check=$2
> > + else
> > + return 0
> > + fi
> > +
> > + # some options need translation for tune2fs
> > + op_set=$(echo $op_set | sed -e 's/data=journal/journal_data/' \
> > + -e 's/data=ordered/journal_data_ordered/' \
> > + -e 's/data=writeback/journal_data_writeback/')
> > + $TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
> > + mnt_only "defaults" $check
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > + if [ "$op_set" = ^* ]; then
> > + op_set=${op_set#^}
> > + else
> > + op_set="^${op_set}"
> > + fi
> > + $TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
> > +}
> > +
> > +# $1 - options to mount with
> > +# $2 - options to remount with
> > +remount() {
> > + # First do this specifying both dev and mnt
> > + print_log "mounting $fstype \"$1\" "
> > + do_mnt $1
> > + [ $? -ne 0 ] && fail && return
> > + print_log "remounting \"$2\" "
> > + do_mnt remount,$2 $3
> > + if [ $? -ne 0 ]; then
> > + fail
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > + return
> > + else
> > + ok
> > + fi
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +
> > + # Now just specify mnt
> > + print_log "mounting $fstype \"$1\" "
> > + do_mnt $1
> > + [ $? -ne 0 ] && fail && return
> > + print_log "remounting (MNT ONLY) \"$2\" "
> > + do_mnt -n remount,$2 $3
> > + if [ $? -ne 0 ]; then
> > + fail
> > + else
> > + ok
> > + fi
> > +
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +}
> > +
> > +# $1 - options to mount with, or -r argument
> > +# $2 - options to remount with
> > +not_remount_noumount() {
> > + remount_only=0
> > + # If -r is specified we're going to do remount only
> > + if [ "$1" == "-r" ]; then
> > + remount_only=1
> > + # Dont need shift since first argument would
> > + # have been consumed by mount anyway
> > + fi
> > +
> > + if [ $remount_only -eq 0 ]; then
> > + print_log "mounting $fstype \"$1\" "
> > + do_mnt $1
> > + [ $? -ne 0 ] && fail && return
> > + fi
> > + print_log "SHOULD FAIL remounting $fstype \"$2\" "
> > + do_mnt remount,$2 $3
> > + if [ $? -eq 0 ]; then
> > + fail
> > + else
> > + ok
> > + fi
> > +
> > + # Now just specify mnt
> > + print_log "SHOULD FAIL remounting $fstype (MNT ONLY) \"$2\" "
> > + do_mnt -n remount,$2 $3
> > + if [ $? -eq 0 ]; then
> > + fail
> > + else
> > + ok
> > + fi
> > +}
> > +
> > +not_remount() {
> > + not_remount_noumount $*
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +}
> > +
> > +
> > +do_mkfs() {
> > + $MKE2FS_PROG -T $fstype -Fq $* >> $seqres.full 2>&1 ||
> > + _fail "mkfs failed - $MKFS_EXT4_PROG -Fq $* $SCRATCH_DEV"
> > +}
> > +
> > +not_ext2() {
> > + if [[ $fstype == "ext2" ]]; then
> > + not_$*
> > + else
> > + $*
> > + fi
> > +}
> > +
> > +only_ext4() {
> > + if [[ $fstype == "ext4" ]]; then
> > + $*
> > + else
> > + not_$*
> > + fi
> > +}
> > +
> > +# Create logdev for external journal
> > +LOOP_IMG=$tmp.logdev
> > +truncate -s ${LOGSIZE}k $LOOP_IMG
> > +LOOP_LOGDEV=`_create_loop_device $LOOP_IMG`
> > +majmin=`stat -c "%t:%T" $LOOP_LOGDEV`
> > +LOGDEV_DEVNUM=`echo "${majmin%:*}*2^8 + ${majmin#*:}" | bc`
> > +
> > +# Test all the extN file system supported by ext4 driver
> > +fstype=
> > +for fstype in ext2 ext3 ext4; do
> > +
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > + $UMOUNT_PROG $SCRATCH_DEV 2> /dev/null
> > +
> > + do_mkfs $SCRATCH_DEV ${SIZE}k
> > +
> > + # do we have fstype support ?
> > + do_mnt
> > + if [ $? -ne 0 ]; then
> > + print_log "$fstype not supported. Skipping..."
> > + ok
> > + continue
> > + fi
> > + if [ ! -f /proc/fs/ext4/$(_short_dev $SCRATCH_DEV)/options ]; then
> > + print_log "$fstype not supported. Skipping..."
> > + ok
> > + continue
> > + fi
> > +
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > +
> > + not_mnt failme
> > + mnt
> > + mnt bsddf
> > + mnt minixdf
> > + mnt grpid
> > + mnt -t bsdgroups grpid
> > + mnt nogrpid
> > + mnt sysvgroups nogrpid
> > + mnt resgid=1001
> > + mnt resuid=1001
> > + mnt sb=131072
> > + mnt errors=continue
> > + mnt errors=panic
> > + mnt errors=remount-ro
> > + mnt nouid32
> > + mnt debug
> > + mnt oldalloc removed
> > + mnt orlov removed
> > + mnt -t user_xattr
> > + mnt nouser_xattr
> > + mnt -t acl
> > + not_ext2 mnt noload norecovery
> > + mnt bh removed
> > + mnt nobh removed
> > + not_ext2 mnt commit=7
> > + mnt min_batch_time=200
> > + mnt max_batch_time=10000
> > + only_ext4 mnt journal_checksum
> > + only_ext4 mnt nojournal_checksum
> > + only_ext4 mnt journal_async_commit,data=writeback
> > + mnt abort ignored
> > + not_ext2 mnt -t data=journal
> > + not_ext2 mnt -t data=ordered
> > + not_ext2 mnt -t data=writeback
> > + not_ext2 mnt data_err=abort
> > + not_ext2 mnt data_err=ignore ignored
> > + mnt usrjquota=aquota.user,jqfmt=vfsv0
> > + not_mnt usrjquota=aquota.user
> > + mnt usrjquota= ignored
> > + mnt grpjquota=aquota.group,jqfmt=vfsv0
> > + not_mnt grpjquota=aquota.group
> > + mnt grpjquota= ignored
> > + mnt jqfmt=vfsold
> > + mnt jqfmt=vfsv0
> > + mnt jqfmt=vfsv1
> > + mnt grpquota
> > + mnt quota
> > + mnt noquota
> > + mnt usrquota
> > + mnt grpquota
> > + mnt barrier
> > + mnt barrier=0 nobarrier
> > + mnt barrier=1 barrier
> > + mnt barrier=99 barrier
> > + mnt -t nobarrier
> > + mnt i_version
> > + mnt stripe=512
> > + only_ext4 mnt delalloc
> > + only_ext4 mnt -t nodelalloc
> > + mnt warn_on_error
> > + mnt nowarn_on_error
> > + not_mnt debug_want_extra_isize=512
> > + mnt debug_want_extra_isize=32 ignored
> > + mnt mblk_io_submit removed
> > + mnt nomblk_io_submit removed
> > + mnt -t block_validity
> > + mnt noblock_validity
> > + mnt inode_readahead_blks=16
> > + not_ext2 mnt journal_ioprio=6 ignored
> > + mnt auto_da_alloc=0 noauto_da_alloc
> > + mnt auto_da_alloc=1 auto_da_alloc
> > + mnt auto_da_alloc=95 auto_da_alloc
> > + mnt auto_da_alloc
> > + mnt noauto_da_alloc
> > + only_ext4 mnt dioread_nolock
> > + only_ext4 mnt nodioread_nolock
> > + only_ext4 mnt dioread_lock nodioread_nolock
> > + mnt -t discard
> > + mnt nodiscard
> > + mnt init_itable=20
> > + mnt init_itable
> > + mnt init_itable=0
> > + mnt noinit_itable
> > + mnt max_dir_size_kb=4096
> > + mnt test_dummy_encryption
> > + mnt test_dummy_encryption=v1
> > + mnt test_dummy_encryption=v2
> > + not_mnt test_dummy_encryption=v3
> > + not_mnt test_dummy_encryption=
> > + mnt inlinecrypt
> > + mnt prefetch_block_bitmaps removed
> > + mnt no_prefetch_block_bitmaps
> > + # We don't currently have a way to know that the option has been
> > + # applied, so comment it out for now. This should be fixed in the
> > + # future.
> > + #mnt mb_optimize_scan=0
> > + #mnt mb_optimize_scan=1
> > + #not_mnt mb_optimize_scan=9
> > + #not_mnt mb_optimize_scan=
> > + mnt nombcache
> > + mnt no_mbcache nombcache
> > + mnt check=none removed
> > + mnt nocheck removed
> > + mnt reservation removed
> > + mnt noreservation removed
> > + mnt journal=20 ignored
> > + not_mnt nonsenseoption
> > + not_mnt nonsenseoption=value
> > +
> > + # generic mount options
> > + mnt lazytime
> > + mnt nolazytime ^lazytime
> > + mnt noatime
> > + mnt nodiratime
> > + mnt noexec
> > + mnt nosuid
> > + mnt ro
> > +
> > + # generic remount check
> > + remount barrier nobarrier
> > + remount nobarrier barrier
> > + remount discard nodiscard
> > + remount nodiscard discard
> > +
> > + # dax mount options
> > + simple_mount -o dax=always $SCRATCH_DEV $SCRATCH_MNT > /dev/null 2>&1
> > + if [ $? -eq 0 ]; then
> > + $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
> > + mnt dax
> > + mnt dax=always
> > + mnt dax=never
> > + mnt dax=inode
> > +
> > + not_remount lazytime dax
> > + not_remount dax=always dax=never
> > +
> > + if [[ $fstype != "ext2" ]]; then
> > + not_remount data=journal dax
> > + not_remount data=journal dax=always
> > + not_remount data=journal dax=never
> > + not_remount data=journal dax=inode
> > + fi
> > + fi
> > +
> > + # Quota remount check
> > + remount grpquota usrquota
> > + remount usrquota quota
> > + remount usrquota usrjquota=q.u,jqfmt=vfsv0
> > + remount grpquota grpjquota=q.g,jqfmt=vfsv0
> > +
> > + not_remount usrquota grpjquota=q.g,jqfmt=vfsv0
> > + not_remount grpquota usrjquota=q.u,jqfmt=vfsv0
> > +
> > + remount quota usrjquota=q.u,jqfmt=vfsv0
> > + not_remount quota grpjquota=q.g,jqfmt=vfsv0
> > +
> > + remount usrjquota=q.u,jqfmt=vfsv0 grpjquota=q.g
> > + not_remount usrjquota=q.u,jqfmt=vfsv0 usrjquota=q.ua
> > + not_remount grpjquota=q.g,jqfmt=vfsv0 grpjquota=q.ga
> > +
> > + remount usrjquota=q.u,jqfmt=vfsv0 usrquota usrjquota=q.u,jqfmt=vfsv0
> > + remount grpjquota=q.g,jqfmt=vfsv0 grpquota grpjquota=q.g,jqfmt=vfsv0
> > + not_remount usrjquota=q.u,jqfmt=vfsv0 grpquota
> > + not_remount grpjquota=q.g,jqfmt=vfsv0 usrquota
> > +
> > + remount grpjquota=q.g,jqfmt=vfsv0 grpjquota= ^grpjquota=
> > + remount usrjquota=q.u,jqfmt=vfsv0 usrjquota= ^usrjquota=
> > + remount grpjquota=q.g,usrjquota=q.u,jqfmt=vfsv0 grpjquota=,usrjquota= ^grpjquota=,^usrjquota=
> > +
> > + remount jqfmt=vfsv0 grpjquota=q.g
> > + remount jqfmt=vfsv0 usrjquota=q.u
> > +
> > + if [[ $fstype != "ext2" ]]; then
> > + remount noload data=journal norecovery
> > + not_remount data=ordered data=journal
> > + not_remount data=journal data=writeback
> > + not_remount data=writeback data=ordered
> > + fi
> > +
> > + do_mkfs -O journal_dev $LOOP_LOGDEV ${LOGSIZE}k
> > + do_mkfs -J device=$LOOP_LOGDEV $SCRATCH_DEV ${SIZE}k
> > + mnt defaults
> > + mnt journal_path=$LOOP_LOGDEV ignored
> > + mnt journal_dev=$LOGDEV_DEVNUM ignored
> > + not_mnt journal_path=${LOOP_LOGDEV}_nonexistent ignored
> > + not_mnt journal_dev=123456 ignored
> > + not_mnt journal_dev=999999999999999 ignored
> > +
> > + do_mkfs -E quotatype=prjquota $SCRATCH_DEV ${SIZE}k
> > + mnt prjquota
> > +
> > + # test clearing/changing journalled quota when enabled
> > + echo "== Testing active journalled quota" >> $seqres.full
> > + mnt_only prjquota,grpjquota=aquota.group,usrjquota=aquota.user,jqfmt=vfsv0
> > +
> > + # Prepare and enable quota
> > + quotacheck -vugm $SCRATCH_MNT >> $seqres.full 2>&1
> > + quotaon -vug $SCRATCH_MNT >> $seqres.full 2>&1
> > +
> > + not_remount_noumount -r grpjquota=
> > + not_remount_noumount -r usrjquota=aaquota.user
> > + not_remount_noumount -r grpjquota=aaquota.group
> > + not_remount_noumount -r jqfmt=vfsv1
> > + not_remount_noumount -r noquota
> > + mnt_only remount,usrquota,grpquota ^usrquota,^grpquota
> > + $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > +
> > + # test clearing/changing quota when enabled
> > + do_mkfs -E quotatype=^prjquota $SCRATCH_DEV ${SIZE}k
> > + not_mnt prjquota
> > + echo "== Testing active non-journalled quota" >> $seqres.full
> > + mnt_only grpquota,usrquota
> > +
> > + # Prepare and enable quota
> > + quotacheck -vugm $SCRATCH_MNT >> $seqres.full 2>&1
> > + quotaon -vug $SCRATCH_MNT >> $seqres.full 2>&1
> > +
> > + not_remount_noumount -r noquota
> > + not_remount_noumount -r usrjquota=aquota.user
> > + not_remount_noumount -r grpjquota=aquota.group
> > + not_remount_noumount -r jqfmt=vfsv1
> > + mnt_only remount,grpjquota= grpquota,^grpjquota
> > + mnt_only remount,usrjquota= usrquota,^usrjquota
> > + mnt_only remount,usrquota,grpquota usrquota,grpquota
> > + quotaoff -f $SCRATCH_MNT >> $seqres.full 2>&1
> > + mnt_only remount,noquota ^usrquota,^grpquota,quota
> > + $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > +
> > + # Quota feature
> > + echo "== Testing quota feature " >> $seqres.full
> > + do_mkfs -O quota -E quotatype=prjquota $SCRATCH_DEV ${SIZE}k
> > + mnt usrjquota=aquota.user,jqfmt=vfsv0 ^usrjquota=
> > + mnt grpjquota=aquota.user,jqfmt=vfsv0 ^grpjquota=
> > + mnt jqfmt=vfsv1 ^jqfmt=
> > + mnt prjquota
> > + mnt usrquota
> > + mnt grpquota
> > + not_remount defaults usrjquota=aquota.user
> > + not_remount defaults grpjquota=aquota.user
> > + not_remount defaults jqfmt=vfsv1
> > + remount defaults grpjquota=,usrjquota= ignored
> > +
> > +done #for fstype in ext2 ext3 ext4; do
> > +
> > +$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > +echo "$ERR errors encountered" >> $seqres.full
> > +
> > +status=$ERR
> > +exit
> > diff --git a/tests/ext4/053.out b/tests/ext4/053.out
> > new file mode 100644
> > index 00000000..d58db7e4
> > --- /dev/null
> > +++ b/tests/ext4/053.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 053
> > +Silence is golden.
> > --
> > 2.31.1
>
