Add test to validate that all the ext4, ext3 and ext2 are properly
recognized, validate and applied to avoid regressions as ext4 moves to
the new mount API.
Signed-off-by: Lukas Czerner <lczerner@xxxxxxxxxx>
---
v2: Move minimum kernel version requirement up to 5.12
Rewrite kernel_gte() to work correctly
tests/ext4/053 | 611 +++++++++++++++++++++++++++++++++++++++++++++
tests/ext4/053.out | 2 +
2 files changed, 613 insertions(+)
create mode 100755 tests/ext4/053
create mode 100644 tests/ext4/053.out
diff --git a/tests/ext4/053 b/tests/ext4/053
new file mode 100755
index 00000000..7163319f
--- /dev/null
+++ b/tests/ext4/053
@@ -0,0 +1,611 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2021 Red Hat, Inc., Lukas Czerner <lczerner@xxxxxxxxxx>.
+#
+# FS QA Test 053
+#
+# Sanity check of ext4 mount options
+#
+. ./common/preamble
+_begin_fstest auto mount
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+ if [ -n "$LOOP_LOGDEV" ];then
+ _destroy_loop_device $LOOP_LOGDEV 2>/dev/null
+ fi
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+echo "Silence is golden."
+
+SIZE=$((1024 * 1024)) # 1GB in KB
+LOGSIZE=$((10 *1024)) # 10MB in KB
+
+_supported_fs ext2 ext3 ext4
+_require_scratch_size $SIZE
+_require_quota
+_require_loop
+_require_command "$TUNE2FS_PROG" tune2fs
+MKE2FS_PROG=$(type -P mke2fs)
+_require_command "$MKE2FS_PROG" mke2fs
+
+LOG=""
+print_log() {
+ LOG="$LOG $@"
+}
+
+KERNEL_VERSION=`uname -r | cut -d'.' -f1,2`
+KERNEL_MAJ=${KERNEL_VERSION%.*}
+KERNEL_MIN=${KERNEL_VERSION#*.}
+
+kernel_gte() {
+ major=${1%.*}
+ minor=${1#*.}
+
+ if [ $KERNEL_MAJ -gt $major ]; then
+ return 0
+ elif [[ $KERNEL_MAJ -eq $major && $KERNEL_MIN -ge $minor ]]; then
+ return 0
+ fi
+ return 1
+}
+
+
+# The aim here is to keep the mount options behaviour stable going forward
+# so there is not much point in testing older kernels.
+kernel_gte 5.12 || _notrun "This test is only relevant for kernel versions 5.12 and higher"
+
+IGNORED="remount,defaults,ignored,removed"
+CHECK_MINFO="lazytime,noatime,nodiratime,noexec,nosuid,ro"
+ERR=0
+
+test_mnt() {
+ findmnt -n $SCRATCH_DEV > /dev/null 2>&1
+ [ $? -ne 0 ] && return $?
+
+ if [ $# -eq 1 ]; then
+ OPTS=$1
+ elif [ $# -eq 2 ]; then
+ OPTS=$2
+ else
+ return 0
+ fi
+
+ print_log "checking \"$OPTS\" "
+ # test options in /proc/fs/ext4/dev/options
+ (
+ ret=0
+ IFS=','
+ for option in $OPTS; do
+ if echo $IGNORED | grep -w $option; then
+ continue
+ fi
+
+ [ $option = "noload" ] && option="norecovery"
+
+ if [[ $option = ^* ]]; then
+ expected=1
+ else
+ expected=0
+ fi
+ option=${option#^}
+
+ if echo $CHECK_MINFO | grep -w $option; then
+ findmnt -n -o OPTIONS $SCRATCH_DEV | grep $option
+ ret=$?
+ else
+ grep $option /proc/fs/ext4/$(_short_dev $SCRATCH_DEV)/options
+ ret=$?
+ fi
+
+ if [ $ret -ne $expected ]; then
+ exit 1
+ fi
+ done
+ ) > /dev/null 2>&1
+ return $?
+}
+
+fail() {
+ print_log " FAILED"
+ ERR=$((ERR+1))
+ echo $LOG | tee -a $seqres.full
+ LOG=""
+}
+
+ok() {
+ print_log " OK"
+ echo $LOG >> $seqres.full
+ LOG=""
+}
+
+simple_mount() {
+ _mount $* >> $seqres.full 2>&1
+}
+
+# $1 - can hold -n option, if it does argumetns are shifted
+# $1 - options to test
+# $2 - if provided it's the option string to check for
+do_mnt() {
+ device=$SCRATCH_DEV
+ # If -n argument is provided do not specify $SCRATCH_DEV
+ # usefull for remount
+ if [ "$1" == "-n" ]; then
+ unset device
+ shift
+ fi
+
+ if [ -z "$1" ]; then
+ simple_mount $device $SCRATCH_MNT
+ ret=$?
+ else
+ simple_mount -o $1 $device $SCRATCH_MNT
+ ret=$?
+ fi
+ if [ $ret -eq 0 ]; then
+ test_mnt $1 $2
+ ret=$?
+ [ $ret -ne 0 ] && print_log "(not found)"
+ else
+ print_log "(failed mount)"
+ fi
+
+ return $ret
+}
+
+not_mnt() {
+ # We don't need -t not not_ variant
+ if [ "$1" == "-t" ]; then
+ shift
+ fi
+
+ print_log "SHOULD FAIL mounting $fstype \"$1\" "
+ do_mnt $@
+ if [ $? -eq 0 ]; then
+ fail
+ else
+ ok
+ fi
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+}
+
+_mnt() {
+ print_log "mounting $fstype \"$1\" "
+ do_mnt $@
+ if [ $? -ne 0 ]; then
+ fail
+ else
+ ok
+ fi
+}
+
+mnt() {
+ # Do we need to run the tune2fs mount option test ?
+ t2fs=0
+ if [ "$1" == "-t" ]; then
+ t2fs=1
+ shift
+ fi
+
+ _mnt $*
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+
+ [ "$t2fs" -eq 0 ] && return
+
+ op_set=$1
+ if [ $# -eq 1 ]; then
+ check=$1
+ elif [ $# -eq 2 ]; then
+ check=$2
+ else
+ return 0
+ fi
+
+ # some options need translation for tune2fs
+ op_set=$(echo $op_set | sed -e 's/data=journal/journal_data/' \
+ -e 's/data=ordered/journal_data_ordered/' \
+ -e 's/data=writeback/journal_data_writeback/')
+ $TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
+ _mnt "defaults" $check
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+ if [ "$op_set" = ^* ]; then
+ op_set=${op_set#^}
+ else
+ op_set="^${op_set}"
+ fi
+ $TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
+}
+
+# $1 - options to mount with
+# $2 - options to remount with
+remount() {
+ # First do this specifying both dev and mnt
+ print_log "mounting $fstype \"$1\" "
+ do_mnt $1
+ [ $? -ne 0 ] && fail && return
+ print_log "remounting \"$2\" "
+ do_mnt remount,$2 $3
+ if [ $? -ne 0 ]; then
+ fail
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+ return
+ else
+ ok
+ fi
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+
+ # Now just specify mnt
+ print_log "mounting $fstype \"$1\" "
+ do_mnt $1
+ [ $? -ne 0 ] && fail && return
+ print_log "remounting (MNT ONLY) \"$2\" "
+ do_mnt -n remount,$2 $3
+ if [ $? -ne 0 ]; then
+ fail
+ else
+ ok
+ fi
+
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+}
+
+# $1 - options to mount with, or -r argument
+# $2 - options to remount with
+_not_remount() {
+ remount_only=0
+ # If -r is specified we're going to do remount only
+ if [ "$1" == "-r" ]; then
+ remount_only=1
+ # Dont need shift since first argument would
+ # have been consumed by mount anyway
+ fi
+
+ if [ $remount_only -eq 0 ]; then
+ print_log "mounting $fstype \"$1\" "
+ do_mnt $1
+ [ $? -ne 0 ] && fail && return
+ fi
+ print_log "SHOULD FAIL remounting $fstype \"$2\" "
+ do_mnt remount,$2 $3
+ if [ $? -eq 0 ]; then
+ fail
+ else
+ ok
+ fi
+
+ # Now just specify mnt
+ print_log "SHOULD FAIL remounting $fstype (MNT ONLY) \"$2\" "
+ do_mnt -n remount,$2 $3
+ if [ $? -eq 0 ]; then
+ fail
+ else
+ ok
+ fi
+}
+
+not_remount() {
+ _not_remount $*
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+}
+
+
+do_mkfs() {
+ $MKE2FS_PROG -T $fstype -Fq $* >> $seqres.full 2>&1 ||
+ _fail "mkfs failed - $MKFS_EXT4_PROG -Fq $* $SCRATCH_DEV"
+}
+
+not_ext2() {
+ if [[ $fstype == "ext2" ]]; then
+ not_$*
+ else
+ $*
+ fi
+}
+
+only_ext4() {
+ if [[ $fstype == "ext4" ]]; then
+ $*
+ else
+ not_$*
+ fi
+}
+
+# Create logdev for external journal
+LOOP_IMG=$tmp.logdev
+truncate -s ${LOGSIZE}k $LOOP_IMG
+LOOP_LOGDEV=`_create_loop_device $LOOP_IMG`
+majmin=`stat -c "%t:%T" $LOOP_LOGDEV`
+LOGDEV_DEVNUM=`echo "${majmin%:*}*2^8 + ${majmin#*:}" | bc`
+
+# Test all the extN file system supported by ext4 driver
+fstype=
+for fstype in ext2 ext3 ext4; do
+
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+ $UMOUNT_PROG $SCRATCH_DEV 2> /dev/null
+
+ do_mkfs $SCRATCH_DEV ${SIZE}k
+
+ # do we have fstype support ?
+ do_mnt
+ if [ $? -ne 0 ]; then
+ print_log "$fstype not supported. Skipping..."
+ ok
+ continue
+ fi
+ if [ ! -f /proc/fs/ext4/$(_short_dev $SCRATCH_DEV)/options ]; then
+ print_log "$fstype not supported. Skipping..."
+ ok
+ continue
+ fi
+
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+
+ not_mnt failme
+ mnt
+ mnt bsddf
+ mnt minixdf
+ mnt grpid
+ mnt -t bsdgroups grpid
+ mnt nogrpid
+ mnt sysvgroups nogrpid
+ mnt resgid=1001
+ mnt resuid=1001
+ mnt sb=131072
+ mnt errors=continue
+ mnt errors=panic
+ mnt errors=remount-ro
+ mnt nouid32
+ mnt debug
+ mnt oldalloc removed
+ mnt orlov removed
+ mnt -t user_xattr
+ mnt nouser_xattr
+ mnt -t acl
+ not_ext2 mnt noload norecovery
+ mnt bh removed
+ mnt nobh removed
+ not_ext2 mnt commit=7
+ mnt min_batch_time=200
+ mnt max_batch_time=10000
+ only_ext4 mnt journal_checksum
+ only_ext4 mnt nojournal_checksum
+ only_ext4 mnt journal_async_commit,data=writeback
+ mnt abort ignored
+ not_ext2 mnt -t data=journal
+ not_ext2 mnt -t data=ordered
+ not_ext2 mnt -t data=writeback
+ not_ext2 mnt data_err=abort
+ not_ext2 mnt data_err=ignore ignored
+ mnt usrjquota=aquota.user,jqfmt=vfsv0
+ not_mnt usrjquota=aquota.user
+ mnt usrjquota= ignored
+ mnt grpjquota=aquota.group,jqfmt=vfsv0
+ not_mnt grpjquota=aquota.group
+ mnt grpjquota= ignored
+ mnt jqfmt=vfsold
+ mnt jqfmt=vfsv0
+ mnt jqfmt=vfsv1
+ mnt grpquota
+ mnt quota
+ mnt noquota
+ mnt usrquota
+ mnt grpquota
+ mnt barrier
+ mnt barrier=0 nobarrier
+ mnt barrier=1 barrier
+ mnt barrier=99 barrier
+ mnt -t nobarrier
+ mnt i_version
+ mnt stripe=512
+ only_ext4 mnt delalloc
+ only_ext4 mnt -t nodelalloc
+ mnt warn_on_error
+ mnt nowarn_on_error
+ not_mnt debug_want_extra_isize=512
+ mnt debug_want_extra_isize=32 ignored
+ mnt mblk_io_submit removed
+ mnt nomblk_io_submit removed
+ mnt -t block_validity
+ mnt noblock_validity
+ mnt inode_readahead_blks=16
+ not_ext2 mnt journal_ioprio=6 ignored
+ mnt auto_da_alloc=0 noauto_da_alloc
+ mnt auto_da_alloc=1 auto_da_alloc
+ mnt auto_da_alloc=95 auto_da_alloc
+ mnt auto_da_alloc
+ mnt noauto_da_alloc
+ only_ext4 mnt dioread_nolock
+ only_ext4 mnt nodioread_nolock
+ only_ext4 mnt dioread_lock nodioread_nolock
+ mnt -t discard
+ mnt nodiscard
+ mnt init_itable=20
+ mnt init_itable
+ mnt init_itable=0
+ mnt noinit_itable
+ mnt max_dir_size_kb=4096
+ mnt test_dummy_encryption
+ mnt test_dummy_encryption=v1
+ mnt test_dummy_encryption=v2
+ not_mnt test_dummy_encryption=v3
+ not_mnt test_dummy_encryption=
+ mnt inlinecrypt
+ mnt prefetch_block_bitmaps removed
+ mnt no_prefetch_block_bitmaps
+ # We don't currently have a way to know that the option has been
+ # applied, so comment it out for now. This should be fixed in the
+ # future.
+ #mnt mb_optimize_scan=0
+ #mnt mb_optimize_scan=1
+ #not_mnt mb_optimize_scan=9
+ #not_mnt mb_optimize_scan=
+ mnt nombcache
+ mnt no_mbcache nombcache
+ mnt check=none removed
+ mnt nocheck removed
+ mnt reservation removed
+ mnt noreservation removed
+ mnt journal=20 ignored
+ not_mnt nonsenseoption
+ not_mnt nonsenseoption=value
+
+ # generic mount options
+ mnt lazytime
+ mnt nolazytime ^lazytime
+ mnt noatime
+ mnt nodiratime
+ mnt noexec
+ mnt nosuid
+ mnt ro
+
+ # generic remount check
+ remount barrier nobarrier
+ remount nobarrier barrier
+ remount discard nodiscard
+ remount nodiscard discard
+
+ # dax mount options
+ simple_mount -o dax=always $SCRATCH_DEV $SCRATCH_MNT > /dev/null 2>&1
+ if [ $? -eq 0 ]; then
+ $UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+ mnt dax
+ mnt dax=always
+ mnt dax=never
+ mnt dax=inode
+
+ not_remount lazytime dax
+ not_remount dax=always dax=never
+
+ if [[ $fstype != "ext2" ]]; then
+ not_remount data=journal dax
+ not_remount data=journal dax=always
+ not_remount data=journal dax=never
+ not_remount data=journal dax=inode
+ fi
+ fi
+
+ # Quota remount check
+ remount grpquota usrquota
+ remount usrquota quota
+ remount usrquota usrjquota=q.u,jqfmt=vfsv0
+ remount grpquota grpjquota=q.g,jqfmt=vfsv0
+
+ not_remount usrquota grpjquota=q.g,jqfmt=vfsv0
+ not_remount grpquota usrjquota=q.u,jqfmt=vfsv0
+
+ remount quota usrjquota=q.u,jqfmt=vfsv0
+ not_remount quota grpjquota=q.g,jqfmt=vfsv0
+
+ remount usrjquota=q.u,jqfmt=vfsv0 grpjquota=q.g
+ not_remount usrjquota=q.u,jqfmt=vfsv0 usrjquota=q.ua
+ not_remount grpjquota=q.g,jqfmt=vfsv0 grpjquota=q.ga
+
+ remount usrjquota=q.u,jqfmt=vfsv0 usrquota usrjquota=q.u,jqfmt=vfsv0
+ remount grpjquota=q.g,jqfmt=vfsv0 grpquota grpjquota=q.g,jqfmt=vfsv0
+ not_remount usrjquota=q.u,jqfmt=vfsv0 grpquota
+ not_remount grpjquota=q.g,jqfmt=vfsv0 usrquota
+
+ remount grpjquota=q.g,jqfmt=vfsv0 grpjquota= ^grpjquota=
+ remount usrjquota=q.u,jqfmt=vfsv0 usrjquota= ^usrjquota=
+ remount grpjquota=q.g,usrjquota=q.u,jqfmt=vfsv0 grpjquota=,usrjquota= ^grpjquota=,^usrjquota=
+
+ remount jqfmt=vfsv0 grpjquota=q.g
+ remount jqfmt=vfsv0 usrjquota=q.u
+
+ if [[ $fstype != "ext2" ]]; then
+ remount noload data=journal norecovery
+ not_remount data=ordered data=journal
+ not_remount data=journal data=writeback
+ not_remount data=writeback data=ordered
+ fi
+
+ do_mkfs -O journal_dev $LOOP_LOGDEV ${LOGSIZE}k
+ do_mkfs -J device=$LOOP_LOGDEV $SCRATCH_DEV ${SIZE}k
+ mnt defaults
+ mnt journal_path=$LOOP_LOGDEV ignored
+ mnt journal_dev=$LOGDEV_DEVNUM ignored
+ not_mnt journal_path=${LOOP_LOGDEV}_nonexistent ignored
+ not_mnt journal_dev=123456 ignored
+ not_mnt journal_dev=999999999999999 ignored
+
+ do_mkfs -E quotatype=prjquota $SCRATCH_DEV ${SIZE}k
+ mnt prjquota
+
+ # test clearing/changing journalled quota when enabled
+ echo "== Testing active journalled quota" >> $seqres.full
+ _mnt prjquota,grpjquota=aquota.group,usrjquota=aquota.user,jqfmt=vfsv0
+
+ # Prepare and enable quota
+ quotacheck -vugm $SCRATCH_MNT >> $seqres.full 2>&1
+ quotaon -vug $SCRATCH_MNT >> $seqres.full 2>&1
+
+ _not_remount -r grpjquota=
+ _not_remount -r usrjquota=aaquota.user
+ _not_remount -r grpjquota=aaquota.group
+ _not_remount -r jqfmt=vfsv1
+ _not_remount -r noquota
+ _mnt remount,usrquota,grpquota ^usrquota,^grpquota
+ $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+
+ # test clearing/changing quota when enabled
+ do_mkfs -E quotatype=^prjquota $SCRATCH_DEV ${SIZE}k
+ not_mnt prjquota
+ echo "== Testing active non-journalled quota" >> $seqres.full
+ _mnt grpquota,usrquota
+
+ # Prepare and enable quota
+ quotacheck -vugm $SCRATCH_MNT >> $seqres.full 2>&1
+ quotaon -vug $SCRATCH_MNT >> $seqres.full 2>&1
+
+ _not_remount -r noquota
+ _not_remount -r usrjquota=aquota.user
+ _not_remount -r grpjquota=aquota.group
+ _not_remount -r jqfmt=vfsv1
+ _mnt remount,grpjquota= grpquota,^grpjquota
+ _mnt remount,usrjquota= usrquota,^usrjquota
+ _mnt remount,usrquota,grpquota usrquota,grpquota
+ quotaoff -f $SCRATCH_MNT >> $seqres.full 2>&1
+ _mnt remount,noquota ^usrquota,^grpquota,quota
+ $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+
+ # Quota feature
+ echo "== Testing quota feature " >> $seqres.full
+ do_mkfs -O quota -E quotatype=prjquota $SCRATCH_DEV ${SIZE}k
+ mnt usrjquota=aquota.user,jqfmt=vfsv0 ^usrjquota=
+ mnt grpjquota=aquota.user,jqfmt=vfsv0 ^grpjquota=
+ mnt jqfmt=vfsv1 ^jqfmt=
+ mnt prjquota
+ mnt usrquota
+ mnt grpquota
+ not_remount defaults usrjquota=aquota.user
+ not_remount defaults grpjquota=aquota.user
+ not_remount defaults jqfmt=vfsv1
+ remount defaults grpjquota=,usrjquota= ignored
+
+done #for fstype in ext2 ext3 ext4; do
+
+$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+echo "$ERR errors encountered" >> $seqres.full
+
+status=$ERR
+exit
diff --git a/tests/ext4/053.out b/tests/ext4/053.out
new file mode 100644
index 00000000..d58db7e4
--- /dev/null
+++ b/tests/ext4/053.out
@@ -0,0 +1,2 @@
+QA output created by 053
+Silence is golden.
--
2.31.1
