I’m using Ethernet bridging on an up-to-date F13 system. I’ve created a bridge adapter br0 and added eth2 and eth3 to it. Everything works as expected for a short time before the 2 Ethernet cards used in the bridge start reporting millions of errors. I confirmed this is the case on 2 separate systems (although both systems use Intel NICs). To try to resolve this I’ve:
- Compiled and installed the latest Intel igb driver 2.3.4
- Installed the latest Fedora kernel 2.6.34.7-56
- Uninstalled the standard bridge-utils 1.2-9, before compiling and installing version 1.4
I’ve pastebin’d the system config here: http://pastebin.ca/1960777
You can see the errors listed on eth2 and eth3. I’ve tried both setting the bridge up using /etc/sysconfig/network-scripts as well as manually (using brctl and ifconfig).
My bridge/Ethernet interface configs are listed here: http://pastebin.ca/1960790
Any suggestions would be greatly appreciated.
Thanks,
Mark
_______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
