On Wed, 13 Oct 2010 11:27:18 -0400 Mark Liggett <mliggett@xxxxxxxxxxxxxx> wrote: > Hi everyone, > > I'm using Ethernet bridging on an up-to-date F13 system. I've created a bridge adapter br0 and added eth2 and eth3 to it. Everything works as expected for a short time before the 2 Ethernet cards used in the bridge start reporting millions of errors. I confirmed this is the case on 2 separate systems (although both systems use Intel NICs). To try to resolve this I've: > > - Compiled and installed the latest Intel igb driver 2.3.4 > - Installed the latest Fedora kernel 2.6.34.7-56 > - Uninstalled the standard bridge-utils 1.2-9, before compiling and installing version 1.4 > > I've pastebin'd the system config here: http://pastebin.ca/1960777 > > You can see the errors listed on eth2 and eth3. I've tried both setting the bridge up using /etc/sysconfig/network-scripts as well as manually (using brctl and ifconfig). > > My bridge/Ethernet interface configs are listed here: http://pastebin.ca/1960790 > > Any suggestions would be greatly appreciated. > > Thanks, > > Mark You might also be creating a packet loop? Turn on spanning tree and find out. -- _______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
