I am facing a jitter issue that I will try to explain :
I have the following configuration :
(A) eth0 <--> br0 <--> eth1 (B)
I have a small and custom kernel (I removed netfilter, for instance) and I am measuring the time between A and B (using hardware taps, etc.).
My bandwidth is quite small (each packet is about 200 bytes and there is a delay of 10ms between each packet).
I am measuring both the latency and the jitter (max_latency - min_latency) and this one is quite large.
I added ftrace option, and after some (long) investigations, I am currently limiting my study to the bridge part.
When I trace only br_handle_frame and br_forward_finish and do my test on 6500 frames I have :
- average latency of 39Âs
- minimum latency of 34 Âs
- maximum latency of 81Âs
Thus, my jitter is 47Âs.
This may seem low, but this is about two to three times what I expect and I cannot see why a bridge which is only forwarding a frame would have jitter ?
If you have any idea, everything is interesting for me.
I thought maybe to skb_clone ?
Best Regards,
JM
_______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
