On Thu, 2013-12-12 at 01:29 +0100, Borislav Petkov wrote: > On Wed, Dec 11, 2013 at 05:01:03PM -0700, Toshi Kani wrote: > > Hi Boris, > > > > An EFI tree kernel panic'd during boot on one of my systems. It boots > > fine when efi=old_map option is specified. So, I think it is caused by > > your EFI virtual mapping changes. > > > > The panic message is as follows. I added some printk's to log the > > arguments of phys_efi_set_virtual_address_map(). The fault address is > > __pa(new_memmap) + 0x20 (too high for the map?). > > > > Thanks, > > -Toshi > > > > > > > > efi: >> Call phys_efi_set_virtual_address_map() > > efi: count 29 > > efi: desc_size 0x30 > > efi: new_memmap 0xffff8a03fec16800 > > efi: __pa(new_memmap) 0x203fec16800 > > > > BUG: unable to handle kernel paging request at 00000203fec16820 > > IP: [<0000000072dcda76>] 0x72dcda75 > > PGD 0 > > It looks like the page hierarchy which contains __pa(new_memmap) is not > mapped in the EFI page table. Nice. > > > Oops: 0000 [#1] SMP > > Modules linked in: > > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #52 > > Hardware name: HP CB920s x1, BIOS Bundle: 005.028.018 SFW: 012.124.000 > > 10/28/2013 > > task: ffffffff81a10480 ti: ffffffff81a00000 task.ti: ffffffff81a00000 > > RIP: 0010:[<0000000072dcda76>] [<0000000072dcda76>] 0x72dcda75 > > RSP: 0000:ffffffff81a01e08 EFLAGS: 00010206 > > RAX: 00000000725fee18 RBX: 00000000725feda0 RCX: 00000203fec16800 > > RDX: 0000000072dfe070 RSI: 0000000060000202 RDI: 0000000072dcdac8 > > RBP: 0000000072dd0560 R08: 0000000000000000 R09: 000000000000001d > > R10: 0000000000000030 R11: 8000000000000000 R12: ffff8a03fec16800 > > R13: 0000000000000001 R14: 000000000000001d R15: 000000000009c000 > > FS: 0000000000000000(0000) GS:ffff88087fa00000(0000) > > knlGS:0000000000000000 > > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > CR2: 00000203fec16820 CR3: 000000000009c000 CR4: 00000000000406b0 > > Stack: > > 0000000072dfb88f 0000000000000001 0000000000000d08 0000000000000000 > > ffffffff81d79a98 0000000072dcdac8 0000000072dcdb93 0000000000000001 > > ffffffff81a01f80 0000000000000570 0000000000000000 0000000000000000 > > Call Trace: > > [<ffffffff81045cec>] ? efi_call4+0x6c/0xf0 > > [<ffffffff81b02f65>] ? efi_enter_virtual_mode+0x229/0x3f1 > > [<ffffffff81aebdf2>] ? start_kernel+0x36c/0x407 > > [<ffffffff81aeb88f>] ? repair_env_string+0x5c/0x5c > > [<ffffffff81aeb5a3>] ? x86_64_start_reservations+0x2a/0x2c > > [<ffffffff81aeb696>] ? x86_64_start_kernel+0xf1/0xf4 > > Code: Bad RIP value. > > RIP [<0000000072dcda76>] 0x72dcda75 > > RSP <ffffffff81a01e08> > > CR2: 00000203fec16820 > > ---[ end trace e50b25032c120443 ]--- > > Ok, it is late here and I'm almost blocked but you could try the dirty > patch below - more fiddling tomorrow. Wow, that was quick. Yes, I will test it and let you know how it goes. > In the meantime, can you send me full dmesg, the exact tree you're using > and your .config? I will send you in a separate email. Thanks, -Toshi -- To unsubscribe from this list: send the line "unsubscribe linux-efi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
