On Tue, 26 Nov, at 01:57:52PM, Dave Young wrote:
> Add a new setup_data type SETUP_EFI for kexec use.
> Passing the saved fw_vendor, runtime, config tables and
> efi runtime mappings.
>
> When entering virtual mode, directly mapping the efi
> runtime ragions which we passed in previously. And skip
> the step to call SetVirtualAddressMap.
>
> Specially for HP z420 workstation it need another variable
> saving, it's the smbios physical address, the HP bios
> also update the SMBIOS address after entering virtual mode
> besides of the standard fw_vendor,runtime and config table.
>
> Tested on ovmf+qemu, lenovo thinkpad, a dell laptop and an
> HP z420 workstation.
>
> v2: refresh based on previous patch changes, code cleanup.
> v3: use ioremap instead of phys_to_virt for esdata
>
> Signed-off-by: Dave Young <dyoung@xxxxxxxxxx>
> ---
> arch/x86/include/asm/efi.h | 12 +++
> arch/x86/include/uapi/asm/bootparam.h | 1 +
> arch/x86/kernel/setup.c | 3 +
> arch/x86/platform/efi/efi.c | 161 ++++++++++++++++++++++++++++++----
> 4 files changed, 160 insertions(+), 17 deletions(-)
[...]
> +void __init parse_efi_setup(u64 phys_addr, u32 data_len)
> +{
> + int size;
> + struct setup_data *sdata;
> + u64 esdata_phys;
> +
> + if (!efi_enabled(EFI_64BIT)) {
> + pr_warn("skipping setup_data on EFI 32BIT!");
> + return;
> + }
Hmm... this warning could be more informative. Perhaps something along
the lines of,
"SETUP_EFI not supported on 32-bit\n"
because the reason we skip is because it isn't supported.
> +
> + sdata = early_memremap(phys_addr, data_len);
> + if (!sdata)
> + return;
> +
> + size = data_len - sizeof(struct setup_data);
> +
> + esdata_phys = phys_addr + sizeof(struct setup_data);
> +
> + nr_efi_runtime_map = (size - sizeof(struct efi_setup_data)) /
> + sizeof(efi_memory_desc_t);
> + early_iounmap(sdata, data_len);
> +
> + /* iounmap esdata in function efi_enter_virtual_mode */
> + esdata = early_memremap(esdata_phys, size);
> +}
>
> static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
> {
> @@ -504,8 +531,12 @@ static int __init efi_systab_init(void *phys)
> }
>
> efi_systab.hdr = systab64->hdr;
> - efi_systab.fw_vendor = systab64->fw_vendor;
> - tmp |= systab64->fw_vendor;
> +
> + if (esdata)
Could we name this something more explicit? 'efi_setup' perhaps?
> @@ -631,6 +670,41 @@ static int __init efi_memmap_init(void)
> return 0;
> }
>
> +static int __init efi_reuse_config(u64 tables, int nr_tables)
> +{
> + void *p, *tablep;
> + int i, sz;
> +
> + if (!efi_enabled(EFI_64BIT))
> + return 0;
> +
> + sz = sizeof(efi_config_table_64_t);
> +
> + p = tablep = early_memremap(tables, nr_tables * sz);
> + if (!p) {
> + pr_err("Could not map Configuration table!\n");
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < efi.systab->nr_tables; i++) {
> + efi_guid_t guid;
> +
> + guid = ((efi_config_table_64_t *)p)->guid;
> +
> + /*
> + HP z420 workstation smbios will be convert to
> + virtual address after enter virtual mode.
> + Thus in case kexec/kdump the physical address
> + will be passed in setup_data.
> + */
This isn't the correct multi-line comment format,
/*
* This is the preferred way to to write a multi-line
* comment.
*/
> + if (!efi_guidcmp(guid, SMBIOS_TABLE_GUID))
> + ((efi_config_table_64_t *)p)->table = esdata->smbios;
> + p += sz;
> + }
> + early_iounmap(tablep, nr_tables * sz);
> + return 0;
> +}
> +
> void __init efi_init(void)
> {
> efi_char16_t *c16;
> @@ -676,6 +750,9 @@ void __init efi_init(void)
> efi.systab->hdr.revision >> 16,
> efi.systab->hdr.revision & 0xffff, vendor);
>
> + if (esdata && esdata->smbios)
> + efi_reuse_config(efi.systab->tables, efi.systab->nr_tables);
> +
Would it make sense to move the ->smbios check inside efi_reuse_config()
in case we need to extend the number of tables in the future?
> if (efi_config_init(arch_tables))
> return;
>
> @@ -886,6 +963,43 @@ ret:
> }
>
> /*
> + * map efi regions which was passed via setup_data
> + * the virt_addr is a fixed addr which was used in
> + * 1st kernel of kexec boot.
> + */
> +static void __init efi_map_regions_fixed(void)
> +{
> + int i;
> + unsigned long size;
> + efi_memory_desc_t *md;
> + u64 end, systab;
> + void *p;
> +
> + efi_runtime_map = kzalloc(nr_efi_runtime_map * memmap.desc_size,
> + GFP_KERNEL);
> + if (!efi_runtime_map)
> + pr_err("Out of memory, EFI runtime on nested kexec non-functional!\n");
> +
> + for (i = 0, p = efi_runtime_map; i < nr_efi_runtime_map; i++) {
> + md = esdata->map + i;
Heh, I read that as 'esdata->map + 1' the first few times.
> + efi_map_region_fixed(md);
> + size = md->num_pages << PAGE_SHIFT;
> + end = md->phys_addr + size;
> +
> + systab = (u64) (unsigned long) efi_phys.systab;
> + if (md->phys_addr <= systab && systab < end) {
> + systab += md->virt_addr - md->phys_addr;
> + efi.systab =
> + (efi_system_table_t *) (unsigned long) systab;
> + }
> + if (efi_runtime_map) {
> + memcpy(p, md, memmap.desc_size);
> + p += memmap.desc_size;
> + }
Is this if () needed? Is it possible to enter the loop and have
'efi_runtime_map' be NULL?
> + }
> +}
> +
> +/*
> * This function will switch the EFI runtime services to virtual mode.
> * Essentially, we look through the EFI memmap and map every region that
> * has the runtime attribute bit set in its memory descriptor into the
> @@ -901,6 +1015,10 @@ ret:
> * so that we're in a different address space when calling a runtime
> * function. For function arguments passing we do copy the PGDs of the
> * kernel page table into ->trampoline_pgd prior to each call.
> + *
> + * Specially for kexec boot efi runtime maps in previous kernel should
> + * be passed in via setup_data. In that case runtime ranges will be mapped
> + * to fixed virtual addresses exactly same as the ones in previous kernel.
> */
> void __init efi_enter_virtual_mode(void)
> {
> @@ -919,12 +1037,15 @@ void __init efi_enter_virtual_mode(void)
> return;
> }
>
> - efi_merge_regions();
> -
> - new_memmap = efi_map_regions(&count);
> - if (!new_memmap) {
> - pr_err("Error reallocating memory, EFI runtime non-functional!\n");
> - return;
> + if (esdata)
> + efi_map_regions_fixed();
> + else {
> + efi_merge_regions();
> + new_memmap = efi_map_regions(&count);
> + if (!new_memmap) {
> + pr_err("Error reallocating memory, EFI runtime non-functional!\n");
> + return;
> + }
> }
>
> BUG_ON(!efi.systab);
> @@ -932,11 +1053,17 @@ void __init efi_enter_virtual_mode(void)
> efi_setup_page_tables();
> efi_sync_low_kernel_mappings();
>
> - status = phys_efi_set_virtual_address_map(
> - memmap.desc_size * count,
> - memmap.desc_size,
> - memmap.desc_version,
> - (efi_memory_desc_t *)__pa(new_memmap));
> + if (esdata) {
> + status = EFI_SUCCESS;
> + early_iounmap(esdata, sizeof(struct efi_setup_data) +
> + nr_efi_runtime_map *
> + sizeof(efi_memory_desc_t));
> + } else
> + status = phys_efi_set_virtual_address_map(
> + memmap.desc_size * count,
> + memmap.desc_size,
> + memmap.desc_version,
> + (efi_memory_desc_t *)__pa(new_memmap));
>
> if (status != EFI_SUCCESS) {
> pr_alert("Unable to switch EFI into virtual mode "
Please fold the pr_alert() into the else branch so that you don't have
to do the 'status = EFI_SUCCESS' dance.
--
Matt Fleming, Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
