On Sun, Sep 22, 2013 at 3:54 PM, H. Peter Anvin <hpa@xxxxxxxxx> wrote:
> Sorry this version is broken and doesn't even compile due to remaining options_size references.
I compiled and tested this series on both x86_64 (using OVMF) and on
the ARM simulator. I just doubled checked
my kernel .config to verify this was not being omitted and I'm pretty
sure this doesn't have any compilation problems.
I did make a few changes to get the untested version you sent out to
compile, but they all seemed to be straightforward typo type fixes.
I'll gladly address any defects in this patch, but I don't see an
compilation problems.
Thanks,
Roy
>
> Roy Franz <roy.franz@xxxxxxxxxx> wrote:
>>From: "H. Peter Anvin" <hpa@xxxxxxxxx>
>>
>>Improve the conversion of the UTF-16 EFI command line
>>to UTF-8 for passing to the kernel.
>>
>>Signed-off-by: Roy Franz <roy.franz@xxxxxxxxxx>
>>---
>> arch/x86/boot/compressed/eboot.c | 3 +-
>>drivers/firmware/efi/efi-stub-helper.c | 92
>>++++++++++++++++++++++++--------
>> 2 files changed, 72 insertions(+), 23 deletions(-)
>>
>>diff --git a/arch/x86/boot/compressed/eboot.c
>>b/arch/x86/boot/compressed/eboot.c
>>index 5e708c0..4723dc89 100644
>>--- a/arch/x86/boot/compressed/eboot.c
>>+++ b/arch/x86/boot/compressed/eboot.c
>>@@ -486,8 +486,7 @@ struct boot_params *make_boot_params(void *handle,
>>efi_system_table_t *_table)
>> hdr->type_of_loader = 0x21;
>>
>> /* Convert unicode cmdline to ascii */
>>- cmdline_ptr = efi_convert_cmdline_to_ascii(sys_table, image,
>>- &options_size);
>>+ cmdline_ptr = efi_convert_cmdline(sys_table, image, &options_size);
>> if (!cmdline_ptr)
>> goto fail;
>> hdr->cmd_line_ptr = (unsigned long)cmdline_ptr;
>>diff --git a/drivers/firmware/efi/efi-stub-helper.c
>>b/drivers/firmware/efi/efi-stub-helper.c
>>index 335d17d..8331892 100644
>>--- a/drivers/firmware/efi/efi-stub-helper.c
>>+++ b/drivers/firmware/efi/efi-stub-helper.c
>>@@ -548,61 +548,111 @@ static efi_status_t
>>efi_relocate_kernel(efi_system_table_t *sys_table_arg,
>>
>> return status;
>> }
>>-/* Convert the unicode UEFI command line to ASCII to pass to kernel.
>>+
>>+/*
>>+ * Get the number of UTF-8 bytes corresponding to an UTF-16 character.
>>+ * This overestimates for surrogates, but that is okay.
>>+ */
>>+static int efi_utf8_bytes(u16 c)
>>+{
>>+ return 1 + (c >= 0x80) + (c >= 0x800);
>>+}
>>+
>>+/*
>>+ * Convert an UTF-16 string, not necessarily null terminated, to
>>UTF-8.
>>+ */
>>+static u8 *efi_utf16_to_utf8(u8 *dst, const u16 *src, int n)
>>+{
>>+ unsigned int c;
>>+
>>+ while (n--) {
>>+ c = *src++;
>>+ if (n && c >= 0xd800 && c <= 0xdbff &&
>>+ *src >= 0xdc00 && *src <= 0xdfff) {
>>+ c = 0x10000 + ((c & 0x3ff) << 10) + (*src & 0x3ff);
>>+ src++;
>>+ n--;
>>+ }
>>+ if (c >= 0xd800 && c <= 0xdfff)
>>+ c = 0xfffd; /* Unmatched surrogate */
>>+ if (c < 0x80) {
>>+ *dst++ = c;
>>+ continue;
>>+ }
>>+ if (c < 0x800) {
>>+ *dst++ = 0xc0 + (c >> 6);
>>+ goto t1;
>>+ }
>>+ if (c < 0x10000) {
>>+ *dst++ = 0xe0 + (c >> 12);
>>+ goto t2;
>>+ }
>>+ *dst++ = 0xf0 + (c >> 18);
>>+ *dst++ = 0x80 + ((c >> 12) & 0x3f);
>>+t2:
>>+ *dst++ = 0x80 + ((c >> 6) & 0x3f);
>>+t1:
>>+ *dst++ = 0x80 + (c & 0x3f);
>>+ }
>>+
>>+ return dst;
>>+}
>>+
>>+/*
>>+ * Convert the unicode UEFI command line to ASCII to pass to kernel.
>> * Size of memory allocated return in *cmd_line_len.
>> * Returns NULL on error.
>> */
>>-static char *efi_convert_cmdline_to_ascii(efi_system_table_t
>>*sys_table_arg,
>>- efi_loaded_image_t *image,
>>- int *cmd_line_len)
>>+static char *efi_convert_cmdline(efi_system_table_t *sys_table_arg,
>>+ efi_loaded_image_t *image,
>>+ int *cmd_line_len)
>> {
>>- u16 *s2;
>>+ const u16 *s2;
>> u8 *s1 = NULL;
>> unsigned long cmdline_addr = 0;
>> int load_options_size = image->load_options_size / 2; /* ASCII */
>>- void *options = image->load_options;
>>- int options_size = 0;
>>+ const u16 *options = image->load_options;
>>+ int options_bytes = 0; /* UTF-8 bytes */
>>+ int options_chars = 0; /* UTF-16 chars */
>> efi_status_t status;
>>- int i;
>> u16 zero = 0;
>>
>> if (options) {
>> s2 = options;
>>- while (*s2 && *s2 != '\n' && options_size < load_options_size) {
>>+ while (*s2 && *s2 != '\n' && options_bytes < load_options_size) {
>>+ options_bytes += efi_utf8_bytes(*s2);
>> s2++;
>>- options_size++;
>> }
>>+ options_chars = s2 - options;
>> }
>>
>>- if (options_size == 0) {
>>- /* No command line options, so return empty string*/
>>- options_size = 1;
>>+ if (!options_chars) {
>>+ /* No command line options, so return empty string */
>> options = &zero;
>> }
>>
>>- options_size++; /* NUL termination */
>>+ options_bytes++; /* NUL termination */
>>+
>> #ifdef CONFIG_ARM
>> /* For ARM, allocate at a high address to avoid reserved
>> * regions at low addresses that we don't know the specfics of
>> * at the time we are processing the command line.
>> */
>>- status = efi_high_alloc(sys_table_arg, options_size, 0,
>>+ status = efi_high_alloc(sys_table_arg, options_bytes, 0,
>> &cmdline_addr, 0xfffff000);
>> #else
>>- status = efi_low_alloc(sys_table_arg, options_size, 0,
>>+ status = efi_low_alloc(sys_table_arg, options_bytes, 0,
>> &cmdline_addr);
>> #endif
>> if (status != EFI_SUCCESS)
>> return NULL;
>>
>> s1 = (u8 *)cmdline_addr;
>>- s2 = (u16 *)options;
>>-
>>- for (i = 0; i < options_size - 1; i++)
>>- *s1++ = *s2++;
>>+ s2 = (const u16 *)options;
>>
>>+ s1 = efi_utf16_to_utf8(s1, s2, options_chars);
>> *s1 = '\0';
>>
>>- *cmd_line_len = options_size;
>>+ *cmd_line_len = options_bytes;
>> return (char *)cmdline_addr;
>> }
>
> --
> Sent from my mobile phone. Please pardon brevity and lack of formatting.
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
